3212306 Phoenix Contact Terminal Blocks
Part#:3212306
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
Test disconnect terminal block, connection method: Push-in connection, cross section: 0.5 mm² - 10 mm² , AWG: 20 - 10, width: 8.2 mm, color: gray
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 3212306 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- ECLASS 9.0 27141126
- UNSPSC 12.01 39121410
- UNSPSC 13.2 39121410
- UNSPSC 21.0 39121410
- Rated surge voltage 6 kV
- Nominal current IN 30 A
- Open side panel Yes
- Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 125 °C
- Smoke gas toxicity NFPA 130 (SMP 800C) passed
- Color gray
- Overvoltage category III
- Result of power-frequency withstand voltage test Test passed
- Short circuit stability result Test passed
- Oscillation, broadband noise test result Test passed
- Potentials 1
- Flammability rating according to UL 94 V0
- Maximum power dissipation for nominal condition 1.31 W
- Number of connections 2
- Insulating material PA
- Insulating material group I
- Maximum load current 30 A (with 10 mm² conductor cross section)
- Result of tight fit on support Test passed
- Number of levels 1
- Nominal cross section 6 mm²
- Degree of pollution 3
- Nominal voltage UN 500 V
- Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
- China RoHS Environmentally friendly use period: unlimited = EFUP-e
- ECLASS 4.1 27141100
- ECLASS 7.0 27141126
- ETIM 6.0 EC000902
- UNSPSC 18.0 39121410
- Tight fit on carrier NS 35
- Proof of thermal characteristics (needle flame) effective duration 30 s
- Test spectrum Service life test category 1, class B, body mounted
- Test duration per axis 5 h
- Shock form Half-sine
- Static insulating material application in cold -60 °C
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
- Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
- Length 99.4 mm
- Conductor cross section solid min. 1 mm²
- Conductor cross section AWG min. 20
- Min. AWG conductor cross section, flexible 20
- Conductor cross section flexible, with ferrule with plastic sleeve max. 6 mm²
- Internal cylindrical gage A5
- Permissible humidity (storage/transport) 30 % ... 70 %
- ECLASS 5.0 27141100
- ETIM 2.0 EC000902
- UNSPSC 6.01 30211811
- ETIM 7.0 EC000902
- Result of thermal test Test passed
- Test directions X-, Y- and Z-axis (pos. and neg.)
- Shock duration 30 ms
- Number of shocks per direction 3
- Surface flammability NFPA 130 (ASTM E 162) passed
- Width 8.2 mm
- Height NS 35/7,5 49.6 mm
- Stripping length 12 mm
- Conductor cross section flexible max. 6 mm²
- Max. AWG conductor cross section, flexible 10
- Conductor cross section flexible, with ferrule without plastic sleeve min. 1 mm²
- Operating temperature -60 °C ... 105 °C (max. short-term operating temperature 130°C)
- Ambient temperature (actuation) -5 °C ... 70 °C
- ECLASS 4.0 27141100
- ETIM 3.0 EC000902
- UNSPSC 7.0901 39121410
- UNSPSC 20.0 39121410
- UNSPSC 19.0 39121410
- Result of surge voltage test Test passed
- Setpoint 5 N
- Short-time current 1.25 kA
- Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03
- Acceleration 5g
- Test frequency f1 = 5 Hz to f2 = 150 Hz
- Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03
- Specific optical density of smoke NFPA 130 (ASTM E 662) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
- Connection 1 level
- Connection in acc. with standard CSA
- Conductor cross section AWG max. 8
- Conductor cross section flexible min. 0.5 mm²
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum 1.5 mm²
- Connection cross sections directly pluggable 1 mm² 10 mm²
- ECLASS 10.0.1 27141126
- ECLASS 6.0 27141100
- Power frequency withstand voltage setpoint 3.31 kV
- Conductor cross section short circuit testing 4 mm²
- ASD level 1.857 (m/s2)2/Hz
- Shock test result Test passed
- Relative insulation material temperature index (Elec., UL 746 B) 130 °C
- Calorimetric heat release NFPA 130 (ASTM E 1354) 27,5 MJ/kg
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
- End cover width 2.2 mm
- Connection method Push-in connection
- Height NS 35/15 57.1 mm
- Conductor cross section solid max. 10 mm²
- Conductor cross section flexible, with ferrule without plastic sleeve max. 6 mm²
- Conductor cross section flexible, with ferrule with plastic sleeve min. 1 mm²
- ETIM 4.0 EC000902
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum 0.5 mm²
- Ambient temperature (assembly) -5 °C ... 70 °C
- ECLASS 5.1 27141100
- ECLASS 11.0 27141126
- UNSPSC 11 39121410
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
