3212196 Phoenix Contact Terminal Blocks

3212196 Product Details

• Insulating material
  PA
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Nominal cross section
  6 mm²
• Flammability rating according to UL 94
  V0
• Finger protection
  guaranteed
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Test spectrum
  Service life test category 2, bogie-mounted
• Number of shocks per direction
  3
• Static insulating material application in cold
  -60 °C
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• End cover width
  2.2 mm
• Height NS 35/15
  57.1 mm
• Connection method
  Push-in connection
• Conductor cross section flexible max.
  6 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  1 mm²
• Connection cross sections directly pluggable
  1 mm² 10 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ETIM 3.0
EC000901
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
ECLASS 11.0
27141141
Number of levels
1
Degree of pollution
3
Open side panel
Yes
Acceleration
30g
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Width
8.2 mm
Length
100.8 mm
Conductor cross section solid min.
1 mm²
Conductor cross section flexible min.
0.5 mm²
Min. AWG conductor cross section, flexible
20
Max. AWG conductor cross section, flexible
10
Internal cylindrical gage
A5
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 6.0
27141100
ETIM 4.0
EC000901
ETIM 6.0
EC000901
UNSPSC 12.01
39121410
Color
green-yellow
Overvoltage category
III
Back of the hand protection
guaranteed
ASD level
6.12 (m/s2)2/Hz
Shock test result
Test passed
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Note
Please observe the current carrying capacity of the DIN rails.
Connection in acc. with standard
CSA
Conductor cross section AWG min.
20
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.1
27141100
ECLASS 7.0
27141141
ETIM 2.0
EC000901
UNSPSC 6.01
30211811
UNSPSC 20.0
39121410
Number of connections
2
Rated surge voltage
6 kV
Insulating material group
I
Oscillation, broadband noise test result
Test passed
Test duration per axis
5 h
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock duration
18 ms
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Stripping length
12 mm
Conductor cross section AWG max.
8
Conductor cross section flexible, with ferrule without plastic sleeve min.
1 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.0
27141100
ECLASS 9.0
27141141
UNSPSC 11
39121410
UNSPSC 18.0
39121410
Height NS 35/7,5
49.6 mm
Connection
1 level
Conductor cross section solid max.
10 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
ECLASS 10.0.1
27141141
ECLASS 5.1
27141100
ETIM 7.0
EC000901
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410

Product condition