3212934 Phoenix Contact Terminal Blocks

Product Details

• Conductor cross section flexible min.
  0.5 mm²
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
  2.5 mm² When using TWIN ferrules, we recommend a minimum ferrule length of 13 mm.
• Conductor cross section solid min.
  1 mm²
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• China RoHS
  Environmentally friendly use period: unlimited = EFUP-e
• ETIM 7.0
  EC000897
• UNSPSC 20.0
  39121410
• UNSPSC 11
  39121410
• Potentials
  1
• Area of application
  Railway industry
• Maximum load current
  52 A (with 10 mm² conductor cross section, rigid)
• Conductor cross section tensile test
  10 mm²
• Requirements, voltage drop
  U1 ≤ 3.2 mV; U2 ≤ 1.5 x U1
• Short-time current
  0.72 kA
• Result of aging test
  Test passed
• Test duration per axis
  5 h
• Test spectrum
  Service life test category 2, bogie-mounted
• Number of shocks per direction
  3
• Color
  gray
• Degree of pollution
  3
Nominal current IN
41 A
Result of surge voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
End cover width
2.2 mm
Height NS 35/7,5
43.5 mm
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Number of levels
1
Insulating material
PA
Overvoltage category
III
Nominal voltage UN
1000 V
Surge voltage test setpoint
9.8 kV
Bending test rotation speed
10 rpm
Tractive force setpoint
90 N
Result of voltage-drop test
Test passed
Short circuit stability result
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
ASD level
6.12 (m/s2)2/Hz
Shock form
Half-sine
Static insulating material application in cold
-60 °C
Tensile test result
Test passed
Setpoint
5 N
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Proof of thermal characteristics (needle flame) effective duration
30 s
Test directions
X-, Y- and Z-axis (pos. and neg.)
Nominal cross section
6 mm²
Rated surge voltage
8 kV
Maximum power dissipation for nominal condition
1.31 W
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Finger protection
guaranteed
Shock duration
18 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Length
90.5 mm
Connection method
Push-in connection
Conductor cross section AWG max.
8
Result of flexion and pull-out test
Test passed
Insulating material group
I
Open side panel
Yes
Result of power-frequency withstand voltage test
Test passed
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Oscillation, broadband noise test result
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock test result
Test passed
Power frequency withstand voltage setpoint
2.2 kV
Tight fit on carrier
NS 35/7,5 UNGELOCHT
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Result of thermal test
Test passed
Acceleration
30g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Bending test turns
135
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Back of the hand protection
guaranteed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Width
8.2 mm
Stripping length
10 mm ... 12 mm
Conductor cross section flexible max.
10 mm²
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Conductor cross section short circuit testing
6 mm²
Number of connections
4
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Flammability rating according to UL 94
V0
Height
42.2 mm
Max. AWG conductor cross section, flexible
10
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
Connection in acc. with standard
CSA
Conductor cross section flexible, with ferrule with plastic sleeve min.
1 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
1 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 7.0
27141120
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
Height NS 35/15
51 mm
Conductor cross section solid max.
10 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Connection cross sections directly pluggable
1 mm² 10 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 11.0
27141120
ECLASS 5.1
27141100
ETIM 2.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
ETIM 3.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section AWG min.
20
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 6.0
27141100
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Internal cylindrical gage
A5
ETIM 4.0
EC000897
Connection
1 level
Min. AWG conductor cross section, flexible
20
ECLASS 5.0
27141100
ECLASS 4.1
27141100
ECLASS 9.0
27141120
ETIM 6.0
EC000897