3212166 Phoenix Contact Terminal Blocks

Product Details

• Nominal current IN
  25 A (with 4 mm² conductor cross section)
• Fuse
  Type C / max. 2.2 W
• Surge voltage test setpoint
  0.91 kV
• Number of levels
  1
• Insulating material
  PA
• Degree of pollution
  3
• Result of surge voltage test
  Test passed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Color
  black
• Rated surge voltage
  6 kV
• Overvoltage category
  III
• Fuse type
  Flat
• Finger protection
  guaranteed
• Result of power-frequency withstand voltage test
  Test passed
• Actuatiing forces on plug in or lever in fuse insert carriers
  Test passed
• Testing the rated value of the power dissipation (overload and short circuit Protection)
  Test passed
• Oscillation, broadband noise test result
  Test passed
• Result of thermal test
  Test passed
• ASD level
  0.964 (m/s2)2/Hz
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
Number of shocks per direction
3
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height
44 mm
Ambient temperature (actuation)
-5 °C ... 70 °C
Number of connections
2
Flammability rating according to UL 94
V0
Rated operating voltage
48 V
Insulating material group
I
Connection in acc. with standard
IEC 60947-7-3
Open side panel
No
Result of tight fit on support
Test passed
Bending test turns
135
Width
8.2 mm
Power frequency withstand voltage setpoint
1 kV
Contact resistance
Test passed
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Test spectrum
Service life test category 1, class B, body mounted
Test duration per axis
5 h
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Maximum load current
30 A (In separate arrangement with 4 mm² conductor cross section)
Bending test rotation speed
10 rpm
Result of flexion and pull-out test
Test passed
Testing the rated value of the power dissipation (exclusively short circuit protection)
Test passed
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Nominal voltage UN
400 V
Back of the hand protection
guaranteed
Compatibitity between modular fuse terminal block and fuse insert
Test passed
Temperature cycles
192
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Acceleration
5g
Shock test result
Test passed
Shock duration
30 ms
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Height NS 35/7,5
45.5 mm
Ambient temperature (assembly)
-5 °C ... 70 °C
Conductor cross section solid min.
0.5 mm²
Conductor cross section flexible max.
10 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm² When using TWIN ferrules, we recommend a minimum ferrule length of 13 mm.
ECLASS 4.1
27141100
ECLASS 5.1
27141100
ECLASS 6.0
27141100
ETIM 3.0
EC000899
UNSPSC 11
39121410
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
Result of aging test
Test passed
Result of temperature-rise test
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock form
Half-sine
Static insulating material application in cold
-60 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Length
74.1 mm
Height NS 35/15
53 mm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Permissible humidity (storage/transport)
30 % ... 70 %
Conductor cross section solid max.
10 mm²
Conductor cross section AWG min.
20
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
ECLASS 10.0.1
27141116
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.0
27141100
ECLASS 9.0
27141116
ETIM 4.0
EC000899
ETIM 2.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 13.2
39121410
UNSPSC 19.0
39121410
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Conductor cross section flexible min.
0.5 mm²
Conductor cross section AWG max.
8
Stripping length
10 mm ... 12 mm
Connection method
Push-in connection
Internal cylindrical gage
A5
ECLASS 4.0
27141100
ECLASS 11.0
27141116
ECLASS 7.0
27141116
ETIM 7.0
EC000899
ETIM 6.0
EC000899
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
UNSPSC 21.0
39121410
Maximum power dissipation for nominal condition
1.31 W
Nominal cross section
6 mm²