3212160 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  2
• Rated surge voltage
  6 kV
• Maximum load current
  20 A
• Power frequency withstand voltage setpoint
  1.89 kV
• Tensile test result
  Test passed
• Short circuit stability result
  Test passed
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Number of levels
  1
• Insulating material
  PA
• Maximum power dissipation for nominal condition
  1.31 W
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Bending test turns
  135
• Result of voltage-drop test
  Test passed
• Short-time current
  0.3 kA
• Test frequency
  f1 = 5 Hz to f2 = 150 Hz
• Acceleration
  5g
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Static insulating material application in cold
  -60 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Height NS 35/15
  51.2 mm
Potentials
1
Flammability rating according to UL 94
V0
Degree of pollution
3
Open side panel
No
Result of surge voltage test
Test passed
Result of flexion and pull-out test
Test passed
Tight fit on carrier
NS 35
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of thermal test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test duration per axis
5 h
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Length
74.1 mm
Height
43.8 mm
Connection method
Push-in connection
Max. AWG conductor cross section, flexible
10
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm² When using TWIN ferrules, we recommend a minimum ferrule length of 13 mm.
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.1
27141100
ETIM 3.0
EC000897
UNSPSC 11
39121410
UNSPSC 19.0
39121410
Color
gray
Overvoltage category
III
Nominal voltage UN
500 V
Finger protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test rotation speed
10 rpm
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Result of aging test
Test passed
Test spectrum
Service life test category 1, class B, body mounted
Shock test result
Test passed
Number of shocks per direction
3
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Width
8.2 mm
Connection
1 level
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section AWG max.
8
Conductor cross section flexible, with ferrule without plastic sleeve min.
1 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Internal cylindrical gage
A5
Nominal cross section
6 mm²
Insulating material group
I
Nominal current IN
20 A
Back of the hand protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Setpoint
5 N
Conductor cross section short circuit testing
2.5 mm²
Oscillation, broadband noise test result
Test passed
ASD level
0.964 (m/s2)2/Hz
Shock form
Half-sine
Shock duration
30 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section solid min.
1 mm²
Conductor cross section AWG min.
20
Min. AWG conductor cross section, flexible
20
Permissible humidity (storage/transport)
30 % ... 70 %
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.0
27141100
ETIM 2.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
UNSPSC 20.0
39121410
Ageing test for screwless modular terminal block temperature cycles
192
Test directions
X-, Y- and Z-axis (pos. and neg.)
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 35/7,5
43.7 mm
Conductor cross section solid max.
10 mm²
Conductor cross section flexible min.
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
1 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
Connection cross sections directly pluggable
1 mm² 10 mm²
ECLASS 4.0
27141121
ECLASS 6.0
27141100
ETIM 7.0
EC000902
UNSPSC 12.01
39121410
Stripping length
10 mm ... 12 mm
Conductor cross section flexible max.
10 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141126
ECLASS 4.1
27141121
ECLASS 7.0
27141126
ETIM 4.0
EC000902
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141126
ECLASS 9.0
27141126
ETIM 6.0
EC000902
UNSPSC 13.2
39121410