3212064 Phoenix Contact Terminal Blocks

Product Details

• Insulating material group
  I
• Flammability rating according to UL 94
  V0
• Shock duration
  18 ms
• Insulating material
  PA
• Degree of pollution
  3
• Maximum power dissipation for nominal condition
  4.06 W
• Finger protection
  guaranteed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Bending test conductor cross section/weight
  2.5 mm² / 0.7 kg
• Short circuit stability result
  Test passed
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Potentials
  1
• Setpoint
  10 N
• Shock test result
  Test passed
• Shock form
  Half-sine
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  27,5 MJ/kg
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Length
  91.6 mm
Stripping length
25 mm
Min. AWG conductor cross section, flexible
12
Conductor cross section flexible, with ferrule with plastic sleeve max.
35 mm²
ECLASS 10.0.1
27141120
ECLASS 4.0
27141100
ETIM 6.0
EC000897
UNSPSC 11
39121410
UNSPSC 21.0
39121410
Color
gray
Nominal current IN
125 A
Result of flexion and pull-out test
Test passed
Tensile test result
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Conductor cross section solid min.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
2.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 5.0
27141100
ECLASS 7.0
27141120
ETIM 3.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 19.0
39121410
Nominal voltage UN
1000 V
Result of power-frequency withstand voltage test
Test passed
Power frequency withstand voltage setpoint
2.2 kV
Tight fit on carrier
NS 35
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 35/7,5
69.8 mm
Number of levels
1
Rated surge voltage
8 kV
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Maximum load current
125 A (with 35 mm² conductor cross section)
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Short-time current
4.2 kA
Oscillation, broadband noise test result
Test passed
Width
16 mm
Connection method
Power-Turn connection
Conductor cross section solid max.
35 mm²
Max. AWG conductor cross section, flexible
2
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 6.0
27141100
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
Number of connections
2
Overvoltage category
III
Open side panel
No
Result of surge voltage test
Test passed
Bending test turns
135
Result of tight fit on support
Test passed
Result of voltage-drop test
Test passed
Result of thermal test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Acceleration
30g
Test duration per axis
5 h
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Connection
1 level
Conductor cross section AWG min.
12
Conductor cross section flexible max.
35 mm²
Conductor cross section flexible min.
2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
2.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141120
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.1
27141100
ETIM 4.0
EC000897
ETIM 7.0
EC000897
UNSPSC 13.2
39121410
Nominal cross section
35 mm²
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Back of the hand protection
guaranteed
Bending test rotation speed
10 rpm
Result of temperature-rise test
Test passed
Result of aging test
Test passed
ASD level
6.12 (m/s2)2/Hz
Number of shocks per direction
3
Static insulating material application in cold
-60 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/15
77.3 mm
Conductor cross section AWG max.
2
Conductor cross section flexible, with ferrule without plastic sleeve max.
35 mm²
Connection cross sections directly pluggable
2.5 mm² 35 mm² 12 2
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ECLASS 9.0
27141120
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
Ageing test for screwless modular terminal block temperature cycles
192
Conductor cross section short circuit testing
35 mm²