3211922 Phoenix Contact Terminal Blocks

3211922 Product Details

• Potentials
  1
• Number of connections
  2
• Color
  gray
• Overvoltage category
  III
• Nominal current IN
  20 A
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.5 mm²
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
  0.5 mm²
• Permissible humidity (storage/transport)
  30 % ... 70 %
• China RoHS
  Environmentally friendly use period: unlimited = EFUP-e
• ECLASS 4.0
  27141100
• ECLASS 5.1
  27141100
• ECLASS 7.0
  27141126
• ETIM 2.0
  EC000897
• ETIM 6.0
  EC000902
• UNSPSC 11
  39121410
• UNSPSC 20.0
  39121410
• Note
  Current and voltage are determined by the plug used.
• Insulating material
  PA
• Flammability rating according to UL 94
  V0
• Degree of pollution
  3
Nominal voltage UN
500 V (Current and voltage are determined by the plug used.)
Back of the hand protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Setpoint
1 N
Result of thermal test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Result of aging test
Test passed
Acceleration
30g
Shock test result
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Width
6.2 mm
Height NS 35/15
44 mm
Connection in acc. with standard
CSA
Conductor cross section AWG max.
10
Max. AWG conductor cross section, flexible
12
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 11.0
27141126
ETIM 3.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Number of levels
1
Nominal cross section
4 mm²
Area of application
Railway industry
Maximum power dissipation for nominal condition
1.02 W
Maximum load current
20 A (with 6 mm² conductor cross section, rigid)
Finger protection
guaranteed
Power frequency withstand voltage setpoint
1.89 kV
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Short circuit stability result
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Conductor cross section short circuit testing
2.5 mm²
ASD level
6.12 (m/s2)2/Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Test duration per axis
5 h
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
56 mm
Height NS 35/7,5
36.5 mm
Conductor cross section solid min.
0.5 mm²
Conductor cross section solid max.
6 mm²
Min. AWG conductor cross section, flexible
24
Connection cross sections directly pluggable
0.5 mm² 6 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.1
27141100
ECLASS 9.0
27141126
ETIM 7.0
EC000902
UNSPSC 12.01
39121410
Rated surge voltage
6 kV
Insulating material group
I
Open side panel
Yes
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Bending test turns
135
Result of temperature-rise test
Test passed
Short-time current
0.3 kA
Ageing test for screwless modular terminal block temperature cycles
192
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
18 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
End cover width
2.2 mm
Connection method
Push-in connection
Conductor cross section AWG min.
24
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 10.0.1
27141126
ECLASS 5.0
27141100
ETIM 4.0
EC000902
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of surge voltage test
Test passed
Result of flexion and pull-out test
Test passed
Result of tight fit on support
Test passed
Tight fit on carrier
NS 35
Result of voltage-drop test
Test passed
Oscillation, broadband noise test result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test spectrum
Service life test category 2, bogie-mounted
Number of shocks per direction
3
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection
1 level
Stripping length
10 mm ... 12 mm
Conductor cross section flexible max.
6 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Internal cylindrical gage
A4
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 6.0
27141100
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410

Product condition