3211854 Phoenix Contact Terminal Blocks

Product Details

• Rated surge voltage
  6 kV
• Width
  6.2 mm
• Height NS 35/15
  55 mm
• Conductor cross section solid min.
  0.2 mm²
• Conductor cross section AWG min.
  24
• Connection in acc. with standard
  CSA
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Number of connections
  4
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• ASD level
  6.12 (m/s2)2/Hz
• Height NS 35/7,5
  47.5 mm
• ECLASS 4.1
  27141100
• ETIM 2.0
  EC000901
• UNSPSC 6.01
  30211811
• UNSPSC 20.0
  39121410
• Shock form
  Half-sine
• Static insulating material application in cold
  -60 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Connection method
  Push-in connection
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
ECLASS 9.0
27141141
UNSPSC 11
39121410
UNSPSC 19.0
39121410
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
ECLASS 5.0
27141100
ETIM 6.0
EC000901
ETIM 7.0
EC000901
Length
83.5 mm
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 6.0
27141100
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 10.0.1
27141141
ECLASS 7.0
27141141
ETIM 4.0
EC000901
UNSPSC 13.2
39121410
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
ECLASS 4.0
27141100
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Note
Please observe the current carrying capacity of the DIN rails.
Conductor cross section flexible max.
6 mm²
Conductor cross section solid max.
6 mm²
Stripping length
10 mm ... 12 mm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Permissible humidity (storage/transport)
30 % ... 70 %
Conductor cross section AWG max.
10
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
ECLASS 11.0
27141141
Color
green-yellow
Area of application
Railway industry
Degree of pollution
3
Oscillation, broadband noise test result
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock test result
Test passed
ETIM 3.0
EC000901
Overvoltage category
III
Number of levels
2
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Insulating material group
I
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
Test spectrum
Service life test category 2, bogie-mounted
Acceleration
30g
ECLASS 5.1
27141100
Internal cylindrical gage
A4
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Finger protection
guaranteed
Flammability rating according to UL 94
V0
Open side panel
Yes
Nominal cross section
4 mm²
Insulating material
PA
Back of the hand protection
guaranteed
Test duration per axis
5 h
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
End cover width
2.2 mm
Shock duration
18 ms
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec.; UL 746 B)
130 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C