3100305 Phoenix Contact Terminal Blocks

3100305 Product Details

• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Operating temperature
  -60 °C ... 105 °C (max. short-term operating temperature 130°C)
• ECLASS 6.0
  27141100
• ECLASS 9.0
  27141120
• ETIM 6.0
  EC000897
• UNSPSC 18.0
  39121410
• ETIM 4.0
  EC000897
• UNSPSC 12.01
  39121410
• UNSPSC 11
  39121410
• UNSPSC 21.0
  39121410
• Open side panel
  Yes
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Overvoltage category
  III
• Bending test turns
  135
• Maximum load current
  17.5 A (with 1.5 mm² conductor cross section)
• Finger protection
  guaranteed
• Bending test rotation speed
  10 rpm
• Result of temperature-rise test
  Test passed
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Length
  22 mm
Number of levels
1
Short circuit stability result
Test passed
Short-time current
0.18 kA
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Result of voltage-drop test
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection
1 level
Tightening torque max
0.25 Nm
Conductor cross section AWG max.
16
Conductor cross section flexible, with ferrule without plastic sleeve max.
0.75 mm²
Nominal voltage UN
400 V
Result of surge voltage test
Test passed
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
ECLASS 11.0
27141120
Setpoint
1 N
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Screw thread
M2
Connection method
Screw connection
Conductor cross section flexible max.
1.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
0.75 mm²
2 conductors with same cross section, stranded max.
0.5 mm²
Nominal current IN
17.5 A
Result of power-frequency withstand voltage test
Test passed
Conductor cross section solid max.
1.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
Power frequency withstand voltage setpoint
1.89 kV
Internal cylindrical gage
A1
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.0
27141100
ECLASS 5.0
27141100
ETIM 7.0
EC000897
UNSPSC 19.0
39121410
Back of the hand protection
guaranteed
Tensile test result
Test passed
Result of thermal test
Test passed
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
End cover width
1 mm
Stripping length
6 mm
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
2 conductors with same cross section, solid max.
0.5 mm²
Height NS 15
23.5 mm
Width
4.2 mm
Proof of thermal characteristics (needle flame) effective duration
30 s
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Tightening torque, min
0.22 Nm
Conductor cross section AWG min.
26
Max. AWG conductor cross section, flexible
16
2 conductors with same cross section, solid min.
0.14 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ECLASS 7.0
27141120
ETIM 2.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 13.2
39121410
Connection in acc. with standard
CSA
2 conductors with same cross section, stranded min.
0.14 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 5.1
27141100
ETIM 3.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 20.0
39121410
Color
gray
Rated surge voltage
4 kV
Min. AWG conductor cross section, flexible
26
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
0.34 mm²
Insulating material
PA
Tight fit on carrier
NS 15
Conductor cross section short circuit testing
1.5 mm²
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
ECLASS 10.0.1
27141120
China RoHS
Environmentally Friendly Use Period = 50 years
Number of connections
2
Degree of pollution
3
Maximum power dissipation for nominal condition
0.56 W
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Potentials
1
Flammability rating according to UL 94
V0
Insulating material group
I
Nominal cross section
1.5 mm²
Shock protection test specification
IEC 60529:2001-02
Result of flexion and pull-out test
Test passed
Result of tight fit on support
Test passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Conductor cross section solid min.
0.14 mm²

Product condition