3073856 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  2
• Rated surge voltage
  6 kV
• Maximum power dissipation for nominal condition
  1.31 W
• Surge voltage test setpoint
  7.2 kV
• UNSPSC 19.0
  39121410
• Number of levels
  1
• Potentials
  1
• Overvoltage category
  III
• Power frequency withstand voltage setpoint
  1.89 kV
• Bending test rotation speed
  10 (+/- 2) rpm
• Bending test conductor cross section/weight
  0.2 mm² / 0.2 kg
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Acceleration
  30g
• Shock form
  Semi-sinusoidal
• Static insulating material application in cold
  -60 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Width
  8.2 mm
• Stripping length
  10 mm
• Conductor cross section solid min.
  0.2 mm²
• Conductor cross section flexible max.
  10 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
4 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 6.0
27141100
UNSPSC 7.0901
39121424
UNSPSC 18.0
39121410
Nominal cross section
6 mm²
Insulating material
PA
Flammability rating according to UL 94
V0
Nominal current IN
20 A (with 10 mm² conductor cross section)
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Finger protection
guaranteed
Result of flexion and pull-out test
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Test spectrum
Service life test category 2, bogie-mounted
ASD level
6.12 (m/s2)2/Hz
Number of shocks per direction
3
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Height NS 35/7,5
47.5 mm
Screw thread
M4
Min. AWG conductor cross section, flexible
24
2 conductors with same cross section, solid min.
0.2 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
Permissible humidity (storage/transport)
30 % ... 70 %
China RoHS
Environmentally Friendly Use Period = 50 years
ETIM 3.0
EC000886
UNSPSC 12.01
39121424
Note
Current and voltage are determined by the plug used.
Degree of pollution
3
Maximum load current
20 A (with 10 mm² conductor cross section)
Open side panel
No
Result of surge voltage test
Test passed
Result of tight fit on support
Test passed
Requirements, voltage drop
U1 ≤ 6,4 mV (1,6 mV x number of conductorclamping units or disconnect unit contactpoints)U2 ≤ 1,5 x U1
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test duration per axis
5 h
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Tightening torque max
1.8 Nm
Conductor cross section AWG max.
8
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
2 conductors with same cross section, stranded max.
2.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
ECLASS 10.0.1
27141126
ECLASS 4.1
27141100
ETIM 4.0
EC000902
ETIM 6.0
EC000902
UNSPSC 11
39121424
Color
blue
Insulating material group
I
Nominal voltage UN
500 V
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Result of temperature-rise test
Test passed
Short-time current
0.3 kA
Conductor cross section short circuit testing
2.5 mm²
Shock duration
18 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Length
57.8 mm
Connection method
Screw connection
Connection in acc. with standard
CSA
Conductor cross section solid max.
10 mm²
Max. AWG conductor cross section, flexible
8
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
2 conductors with same cross section, solid max.
2.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141126
ECLASS 5.0
27141100
ECLASS 7.0
27141126
ECLASS 9.0
27141126
UNSPSC 6.01
30211827
UNSPSC 20.0
39121410
Back of the hand protection
guaranteed
Result of voltage-drop test
Test passed
Bending test turns
135
Short circuit stability result
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 35/15
55 mm
Tightening torque, min
1.5 Nm
Conductor cross section AWG min.
24
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Internal cylindrical gage
A5
ECLASS 4.0
27141100
ECLASS 5.1
27141100
ETIM 2.0
EC000886
ETIM 7.0
EC000902
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410