Bryan Obida

Live support:

Monday - Friday 6AM - 6PM PST

3073283 Phoenix Contact Terminal Blocks

Phoenix Contact 3073283 Disconnect terminal block, nom. voltage: 500 V, nominal current: 20 A, connection method: Screw connection, cross section: 0.14 mm² - 6 mm², AWG: 26 - 10, length: 57.8 mm, width: 6.2 mm, color: blue, mounting: NS 35/7,5, NS 35/15
Phoenix Contact

Part#:3073283

Manufacturer:Phoenix Contact

Product Lifecycle:Active

In-stock parts: 245

Nov 24, 2024

Disconnect terminal block, nom. voltage: 500 V, nominal current: 20 A, connection method: Screw connection, cross section: 0.14 mm² - 6 mm², AWG: 26 - 10, length: 57.8 mm, width: 6.2 mm, color: blue, mounting: NS 35/7,5, NS 35/15

About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.

Check out the 3073283 Phoenix Contact price in the box on the right side or send a quick quote.

Product Details

  • Rated surge voltage
    6 kV
  • Insulating material group
    I
  • Back of the hand protection
    guaranteed
  • Power frequency withstand voltage setpoint
    1.89 kV
  • Setpoint
    1 N
  • Result of thermal test
    Test passed
  • Nominal cross section
    4 mm²
  • Degree of pollution
    3
  • Shock protection test specification
    IEC 60529:2001-02
  • Finger protection
    guaranteed
  • Result of flexion and pull-out test
    Test passed
  • Tensile test result
    Test passed
  • Requirement temperature-rise test
    Increase in temperature ≤ 45 K
  • Short-time current
    0.48 kA
  • Oscillation, broadband noise test result
    Test passed
  • Shock test result
    Test passed
  • Shock form
    Half-sine
  • Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
    125 °C
  • Calorimetric heat release NFPA 130 (ASTM E 1354)
    27,5 MJ/kg
  • Screw thread
    M3
  • Connection in acc. with standard
    CSA
  • Conductor cross section AWG max.
    10
  • Conductor cross section flexible, with ferrule without plastic sleeve max.
    4 mm²
  • 2 conductors with same cross section, stranded max.
    1.5 mm²
  • Internal cylindrical gage
    A4
  • ECLASS 10.0.1
    27141126
  • ECLASS 6.0
    27141100
  • ETIM 3.0
    EC000886
  • ETIM 7.0
    EC000902
  • UNSPSC 13.2
    39121410
  • UNSPSC 21.0
    39121410
  • Number of levels
    1
  • Color
    blue
  • Maximum power dissipation for nominal condition
    1.02 W
  • Nominal current IN
    20 A (with 4 mm² conductor cross section)
  • Result of surge voltage test
    Test passed
  • Bending test rotation speed
    10 rpm
  • Tight fit on carrier
    NS 35
  • Result of temperature-rise test
    Test passed
  • Test frequency
    f1 = 5 Hz to f2 = 150 Hz
  • Test duration per axis
    5 h
  • Surface flammability NFPA 130 (ASTM E 162)
    passed
  • Fire protection for rail vehicles (DIN EN 45545-2) R26
    HL 1 - HL 3
  • Height NS 35/7,5
    47.5 mm
  • Stripping length
    9 mm
  • Conductor cross section solid max.
    6 mm²
  • Min. AWG conductor cross section, flexible
    26
  • 2 conductors with same cross section, solid min.
    0.14 mm²
  • 2 conductors with same cross section, solid max.
    1.5 mm²
  • Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
    1.5 mm²
  • Ambient temperature (assembly)
    -5 °C ... 70 °C
  • ECLASS 4.1
    27141100
  • ETIM 2.0
    EC000886
  • UNSPSC 12.01
    39121424
  • UNSPSC 19.0
    39121410
  • Number of connections
    2
  • Flammability rating according to UL 94
    V0
  • Maximum load current
    20 A (with 6 mm² conductor cross section)
  • Nominal voltage UN
    500 V
  • Bending test conductor cross section/weight
    0.14 mm² / 0.2 kg
  • Result of voltage-drop test
    Test passed
  • Conductor cross section short circuit testing
    4 mm²
  • ASD level
    1.857 (m/s2)2/Hz
  • Number of shocks per direction
    3
  • Specific optical density of smoke NFPA 130 (ASTM E 662)
    passed
  • Width
    6.2 mm
  • Height NS 35/15
    55 mm
  • Tightening torque max
    0.8 Nm
  • Conductor cross section flexible max.
    6 mm²
  • Conductor cross section flexible, with ferrule without plastic sleeve min.
    0.14 mm²
  • Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
    2.5 mm²
  • Ambient temperature (storage/transport)
    -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
  • Ambient temperature (actuation)
    -5 °C ... 70 °C
  • ECLASS 11.0
    27141126
  • ECLASS 5.1
    27141100
  • UNSPSC 6.01
    30211827
  • UNSPSC 7.0901
    39121424
  • Note
    Current and voltage are determined by the plug used.
  • Potentials
    1
  • Insulating material
    PA
  • Overvoltage category
    III
  • Open side panel
    No
  • Result of power-frequency withstand voltage test
    Test passed
  • Result of the test for mechanical stability of terminal points (5 x conductor connection)
    Test passed
  • Bending test turns
    135
  • Result of tight fit on support
    Test passed
  • Short circuit stability result
    Test passed
  • Proof of thermal characteristics (needle flame) effective duration
    30 s
  • Test spectrum
    Service life test category 1, class B, body mounted
  • Test directions
    X-, Y- and Z-axis (pos. and neg.)
  • Test specification, shock test
    DIN EN 50155 (VDE 0115-200):2008-03
  • Relative insulation material temperature index (Elec., UL 746 B)
    130 °C
  • Fire protection for rail vehicles (DIN EN 45545-2) R22
    HL 1 - HL 3
  • Length
    57.8 mm
  • Connection method
    Screw connection
  • Conductor cross section solid min.
    0.14 mm²
  • Conductor cross section flexible min.
    0.14 mm²
  • Conductor cross section flexible, with ferrule with plastic sleeve min.
    0.14 mm²
  • 2 conductors with same cross section, stranded min.
    0.14 mm²
  • Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
    0.14 mm²
  • Permissible humidity (storage/transport)
    30 % ... 70 %
  • ECLASS 4.0
    27141100
  • ECLASS 7.0
    27141126
  • ETIM 4.0
    EC000897
  • UNSPSC 20.0
    39121410
  • Test specification, oscillation, broadband noise
    DIN EN 50155 (VDE 0115-200):2008-03
  • Acceleration
    5g
  • Shock duration
    30 ms
  • Static insulating material application in cold
    -60 °C
  • Smoke gas toxicity NFPA 130 (SMP 800C)
    passed
  • Fire protection for rail vehicles (DIN EN 45545-2) R23
    HL 1 - HL 3
  • Fire protection for rail vehicles (DIN EN 45545-2) R24
    HL 1 - HL 3
  • Tightening torque, min
    0.6 Nm
  • Conductor cross section AWG min.
    26
  • Max. AWG conductor cross section, flexible
    10
  • Conductor cross section flexible, with ferrule with plastic sleeve max.
    4 mm²
  • Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
    0.5 mm²
  • Operating temperature
    -60 °C ... 105 °C (max. short-term operating temperature 130°C)
  • China RoHS
    Environmentally Friendly Use Period = 50 years
  • ECLASS 5.0
    27141100
  • ECLASS 9.0
    27141126
  • ETIM 6.0
    EC000902
  • UNSPSC 11
    39121424
  • UNSPSC 18.0
    39121410

Product condition

ORIGINAL PACKAGING

SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging


This item can ship within 24h!

1-year warranty

$3.43

Stock:

245

Select Qty:

$3.43

$3.43 each

By purchasing this item, you agree to the Terms & Conditions

Quotebeam is NOT an authorized distributor of Phoenix Contact

Shipping and Delivery Worldwide

calculate costs and time


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Phoenix Contact Disclaimer:

The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo