3073212 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  4
• Insulating material
  PA
• Overvoltage category
  III
• Insulating material group
  I
• Number of levels
  1
• Color
  orange
• Flammability rating according to UL 94
  V0
• Maximum power dissipation for nominal condition
  0.77 W
• Maximum load current
  30 A (with 4 mm² conductor cross section)
• Nominal voltage UN
  800 V
• Finger protection
  guaranteed
• Back of the hand protection
  guaranteed
• Surge voltage test setpoint
  9.6 kV
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Bending test rotation speed
  10 (+/- 2) rpm
• Bending test turns
  135
• Bending test conductor cross section/weight
  0.08 mm² / 0.1 kg
• Conductor cross section tensile test
  4 mm²
• Result of voltage-drop test
  Test passed
• Requirements, voltage drop
  U1 ≤ 3.2 mV; U2 ≤ 1.5 x U1
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Result of aging test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
ASD level
6.12 (m/s2)2/Hz
Test duration per axis
5 h
Shock form
Half-sine
Test directions
X-, Y- and Z-axis (pos. and neg.)
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Nominal cross section
2.5 mm²
Rated surge voltage
8 kV
Degree of pollution
3
Nominal current IN
24 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Open side panel
Yes
Result of surge voltage test
Test passed
Result of power-frequency withstand voltage test
Test passed
Power frequency withstand voltage setpoint
2 kV
Result of flexion and pull-out test
Test passed
Tensile test result
Test passed
Tractive force setpoint
60 N
Result of tight fit on support
Test passed
Tight fit on carrier
NS 32/NS 35
Result of temperature-rise test
Test passed
Conductor cross section short circuit testing
4 mm²
Result of thermal test
Test passed
Short-time current
0.48 kA
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Ageing test for screwless modular terminal block temperature cycles
192
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Acceleration
30g
Shock duration
18 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
End cover width
4 mm
Width
10.4 mm
Length
42.7 mm
Height
22 mm
Height NS 35/7,5
32 mm
Connection
1 level
Connection in acc. with standard
CSA
Conductor cross section AWG min.
28
Conductor cross section flexible min.
0.08 mm²
Conductor cross section flexible max.
2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
ECLASS 4.0
27141100
ECLASS 4.1
27141100
ECLASS 5.1
27141100
ECLASS 6.0
27141100
ETIM 2.0
EC000902
ETIM 6.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 13.2
39121410
UNSPSC 18.0
39121410
UNSPSC 20.0
39121410
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/15
39.5 mm
Connection method
Spring-cage connection
Stripping length
8 mm
Conductor cross section solid min.
0.08 mm²
Conductor cross section solid max.
4 mm²
Conductor cross section AWG max.
12
Min. AWG conductor cross section, flexible
28
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (assembly)
-5 °C ... 70 °C
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 11.0
27141120
ECLASS 5.0
27141100
ECLASS 7.0
27141120
ECLASS 9.0
27141120
ETIM 3.0
EC000902
ETIM 4.0
EC000902
ETIM 7.0
EC000897
UNSPSC 11
39121410
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
UNSPSC 21.0
39121410