3073173 Phoenix Contact Terminal Blocks

Product Details

• Color
  orange
• Overvoltage category
  III
• Nominal current IN
  24 A
• Back of the hand protection
  guaranteed
• Surge voltage test setpoint
  9.6 kV
• Bending test turns
  135
• Degree of pollution
  3
• Nominal voltage UN
  800 V
• Result of surge voltage test
  Test passed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Tensile test result
  Test passed
• Short circuit stability result
  Test passed
• Conductor cross section short circuit testing
  4 mm²
• Test spectrum
  Service life test category 2, bogie-mounted
• Number of levels
  1
• Rated surge voltage
  8 kV
• Insulating material group
  I
• Finger protection
  guaranteed
• Result of flexion and pull-out test
  Test passed
• Bending test conductor cross section/weight
  0.08 mm² / 0.1 kg
Requirements, voltage drop
U1 ≤ 3.2 mV; U2 ≤ 1.5 x U1
Result of thermal test
Test passed
Acceleration
30g
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
End cover width
4 mm
Height NS 15
30 mm
Connection in acc. with standard
CSA
Conductor cross section AWG min.
28
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.0
27141100
ECLASS 9.0
27141120
ETIM 6.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
Nominal cross section
2.5 mm²
Flammability rating according to UL 94
V0
Maximum load current
30 A (with 4 mm² conductor cross section)
Open side panel
Yes
Power frequency withstand voltage setpoint
0.002 kV
Bending test rotation speed
10 (+/- 2) rpm
Result of voltage-drop test
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of aging test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Shock form
Half-sine
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height
22 mm
Connection method
Spring-cage connection
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
ECLASS 10.0.1
27141120
ECLASS 5.1
27141100
ETIM 4.0
EC000902
UNSPSC 6.01
30211811
UNSPSC 21.0
39121410
Number of connections
4
Insulating material
PA
Maximum power dissipation for nominal condition
0.77 W
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of power-frequency withstand voltage test
Test passed
Result of tight fit on support
Test passed
Short-time current
0.48 kA
Ageing test for screwless modular terminal block temperature cycles
192
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test duration per axis
5 h
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Length
32 mm
Conductor cross section solid min.
0.08 mm²
Conductor cross section flexible max.
2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 4.1
27141100
ETIM 2.0
EC000902
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
Tight fit on carrier
NS 32/NS 35
Result of temperature-rise test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test directions
X-, Y- and Z-axis (pos. and neg.)
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Connection
1 level
Conductor cross section AWG max.
12
Min. AWG conductor cross section, flexible
28
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 7.0
27141120
ETIM 7.0
EC000897
UNSPSC 13.2
39121410
ASD level
6.12 (m/s2)2/Hz
Shock duration
18 ms
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Width
10.4 mm
Stripping length
8 mm
Conductor cross section solid max.
4 mm²
Conductor cross section flexible min.
0.08 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141120
ECLASS 6.0
27141100
ETIM 3.0
EC000902
UNSPSC 11
39121410
UNSPSC 20.0
39121410