3072801 Phoenix Contact Terminal Blocks

Product Details

• Note
  Terminal point
• Stripping length
  10 mm
• UNSPSC 13.2
  39121410
• Internal cylindrical gage
  A5
• Potentials
  1
• Nominal voltage UN
  800 V
• Result of surge voltage test
  Test passed
• Length
  66.5 mm
• Flammability rating according to UL 94
  V0
• Maximum power dissipation for nominal condition
  1.31 W
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Surge voltage test setpoint
  7.2 kV
• Insulating material
  PA
• Overvoltage category
  III
• Color
  gray
• Number of connections
  2
• UNSPSC 20.0
  39121410
• 2 conductors with same cross section, stranded min.
  0.5 mm²
• Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
  0.5 mm²
• ECLASS 10.0.1
  27141120
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.1
27141100
ETIM 6.0
EC000897
UNSPSC 19.0
39121410
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 7.0
27141120
ECLASS 6.0
27141100
UNSPSC 7.0901
39121410
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ETIM 3.0
EC000902
UNSPSC 11
39121410
UNSPSC 18.0
39121410
Proof of thermal characteristics (needle flame) effective duration
30 s
Test directions
X-, Y- and Z-axis (pos. and neg.)
Rated surge voltage
6 kV
Maximum load current
57 A (with 10 mm² conductor cross section)
Result of power-frequency withstand voltage test
Test passed
Result of tight fit on support
Test passed
Tensile test result
Test passed
Result of temperature-rise test
Test passed
Degree of pollution
3
Static insulating material application in cold
-60 °C
Number of levels
1
Finger protection
guaranteed
Bending test turns
135
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section AWG min.
20
Conductor cross section flexible min.
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
2 conductors with same cross section, solid max.
2.5 mm²
Result of voltage-drop test
Test passed
Short-time current
0.72 kA
ASD level
6.12 (m/s2)2/Hz
Width
8.2 mm
Connection
1 level
Nominal cross section
6 mm²
Nominal current IN
41 A
Power frequency withstand voltage setpoint
2 kV
Tractive force setpoint
90 N
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Test spectrum
Service life test category 2, bogie-mounted
Acceleration
30g
Min. AWG conductor cross section, flexible
20
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
ECLASS 5.0
27141100
Shock duration
18 ms
Number of shocks per direction
3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/7,5
48 mm
Tightening torque, min
1.5 Nm
Conductor cross section solid max.
10 mm²
Insulating material group
I
Short circuit stability result
Test passed
Result of thermal test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Shock form
Half-sine
Surface flammability NFPA 130 (ASTM E 162)
passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 35/15
55.5 mm
Screw thread
M4
Conductor cross section solid min.
0.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Back of the hand protection
guaranteed
Bending test rotation speed
10 rpm
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Requirements, voltage drop
U1 ≤ 3,2 mVU2 ≤ 1,5 x U1dT ≤ 45 K
Conductor cross section short circuit testing
6 mm²
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test duration per axis
5 h
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Max. AWG conductor cross section, flexible
10
REACh SVHC
Lead 7439-92-1
Connection method
Screw connection
Tightening torque max
1.6 Nm
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
End cover width
2.2 mm
Height NS 32
53 mm
Conductor cross section flexible max.
6 mm²
Conductor cross section AWG max.
8
Tight fit on carrier
NS 32/NS 35
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Ambient temperature (actuation)
-5 °C ... 70 °C
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
2 conductors with same cross section, solid min.
0.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Result of flexion and pull-out test
Test passed
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Open side panel
Yes
Conductor cross section tensile test
10 mm²
ECLASS 9.0
27141120
ECLASS 4.0
27141100
ECLASS 4.1
27141100
ETIM 7.0
EC000897
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
2.5 mm²
UNSPSC 6.01
30211811
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
4 mm²
ETIM 4.0
EC000902
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
2 conductors with same cross section, stranded max.
4 mm²