3072815 Phoenix Contact Terminal Blocks
Part#:3072815
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 10
Nov 23, 2024
Disconnect terminal block, connection method: Screw connection, cross section: 0.2 mm² - 10 mm² , AWG: 24 - 8, width: 8.2 mm, mounting type: NS 35/7,5, NS 35/15, NS 32, color: gray
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 3072815 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- End cover width 2.2 mm
- Requirements, voltage drop ≤ 6,4 mV
- Oscillation, broadband noise test result Test passed
- Test frequency f1 = 5 Hz to f2 = 250 Hz
- Shock form Half-sine
- Static insulating material application in cold -60 °C
- Nominal cross section 6 mm²
- Flammability rating according to UL 94 V0
- Insulating material group I
- Nominal current IN 41 A
- Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11
- Back of the hand protection guaranteed
- Result of power-frequency withstand voltage test Test passed
- Tensile test result Test passed
- Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
- Number of connections 2
- Rated surge voltage 8 kV
- Maximum load current 50 A (with 10 mm² conductor cross section)
- Surge voltage test setpoint 9.8 kV
- Bending test turns 135
- Bending test rotation speed 10 rpm
- Temperature-rise test Test passed
- Result of thermal test Test passed
- ASD level 6.12 (m/s2)2/Hz
- Test directions X-, Y- and Z-axis (pos. and neg.)
- Shock duration 18 ms
- Number of shocks per direction 3
- Smoke gas toxicity NFPA 130 (SMP 800C) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
- Width 8.2 mm
- Height NS 32 58 mm
- Conductor cross section AWG min. 24
- Stripping length 12 mm
- Ambient temperature (assembly) -5 °C ... 70 °C
- ECLASS 4.0 27141100
- ECLASS 7.0 27141126
- UNSPSC 6.01 30211811
- UNSPSC 12.01 39121410
- Degree of pollution 3
- Overvoltage category III
- Nominal voltage UN 1000 V (Rated voltage for open disconnect point 500 V)
- Result of surge voltage test Test passed
- Bending test conductor cross section/weight 0.2 mm² / 0.2 kg
- Result of tight fit on support Test passed
- Connection method Screw connection
- Tightening torque max 1.8 Nm
- Tightening torque bridge thread 0.5 Nm ... 0.6 Nm (M3 thread)
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 5.1 27141100
- ETIM 3.0 EC000902
- UNSPSC 7.0901 39121410
- UNSPSC 20.0 39121410
- Number of levels 1
- Insulating material PA
- Connection in acc. with standard IEC 60947-7-1
- Finger protection guaranteed
- Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum 1.5 mm²
- Operating temperature -60 °C ... 105 °C (max. short-term operating temperature 130°C)
- Ambient temperature (actuation) -5 °C ... 70 °C
- ECLASS 11.0 27141126
- ECLASS 9.0 27141126
- ETIM 4.0 EC000902
- UNSPSC 11 39121410
- UNSPSC 19.0 39121410
- Color gray
- Maximum power dissipation for nominal condition 1.31 W
- Open side panel Yes
- Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
- Permissible humidity (storage/transport) 30 % ... 70 %
- ECLASS 4.1 27141100
- ECLASS 6.0 27141100
- ETIM 6.0 EC000902
- UNSPSC 13.2 39121410
- UNSPSC 21.0 39121410
- Note Terminal point
- Screw thread M4
- Tightening torque, min 1.5 Nm
- REACh SVHC Lead 7439-92-1
- ECLASS 10.0.1 27141126
- ECLASS 5.0 27141100
- ETIM 7.0 EC000902
- UNSPSC 18.0 39121410
- Conductor cross section solid min. 0.2 mm²
- Power frequency withstand voltage setpoint 2.2 kV
- Tractive force setpoint 90 N
- Tight fit on carrier NS 32/NS 35
- Short circuit stability result Test passed
- Test duration per axis 5 h
- Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03
- Relative insulation material temperature index (Elec., UL 746 B) 130 °C
- Conductor cross section flexible min. 0.2 mm²
- 2 conductors with same cross section, solid min. 0.2 mm²
- Conductor cross section tensile test 10 mm²
- Conductor cross section short circuit testing 10 mm²
- Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
- Conductor cross section flexible max. 10 mm²
- Conductor cross section flexible, with ferrule with plastic sleeve min. 0.25 mm²
- Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum 0.25 mm²
- Result of flexion and pull-out test Test passed
- Setpoint 5 N
- Proof of thermal characteristics (needle flame) effective duration 30 s
- Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03
- Acceleration 30g
- Specific optical density of smoke NFPA 130 (ASTM E 662) passed
- Length 105.2 mm
- Height NS 35/7,5 53 mm
- Shock test result Test passed
- Surface flammability NFPA 130 (ASTM E 162) passed
- Conductor cross section flexible, with ferrule with plastic sleeve max. 6 mm²
- 2 conductors with same cross section, stranded min. 0.2 mm²
- Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed
- Result of voltage-drop test Test passed
- Short-time current 1.2 kA
- Test spectrum Service life test category 2, bogie-mounted
- Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
- Height NS 35/15 60.5 mm
- Conductor cross section flexible, with ferrule without plastic sleeve max. 6 mm²
- 2 conductors with same cross section, stranded max. 2.5 mm²
- 2 conductors with same cross section, solid max. 2.5 mm²
- Conductor cross section flexible, with ferrule without plastic sleeve min. 0.25 mm²
- Conductor cross section AWG max. 8
- Conductor cross section solid max. 10 mm²
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
This item can ship within 24h!
1-year warranty
$11.72
Stock:
10
Select Qty:
$11.72
$11.72 each
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨