3072190 Phoenix Contact Terminal Blocks

Product Details

• Oscillation, broadband noise test result
  Test passed
• Acceleration
  5g
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Width
  8.2 mm
• Conductor cross section solid max.
  4 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve max.
  4 mm²
• Cross section with insertion bridge, stranded max.
  4 mm²
• Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
  0.25 mm²
• Stripping length
  8 mm
• Screw thread
  M3
• Permissible humidity (storage/transport)
  30 % ... 70 %
• ECLASS 4.0
  27141100
• ECLASS 5.1
  27141100
• ETIM 2.0
  EC000897
• ETIM 6.0
  EC000899
• UNSPSC 13.2
  39121410
• UNSPSC 21.0
  39121410
• Testing the rated value of the power dissipation (exclusively short circuit protection)
  Test passed
ASD level
1.857 (m/s2)2/Hz
Shock test result
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Conductor cross section flexible max.
4 mm²
Result of temperature-rise test
Test passed
Test spectrum
Service life test category 1, class B, body mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
30 ms
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 35/7,5
56.5 mm
Height NS 32
61.5 mm
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Conductor cross section AWG max.
12
2 conductors with same cross section, stranded min.
0.2 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Connection method
Screw connection
Tightening torque, min
0.6 Nm
ECLASS 10.0.1
27141116
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.0
27141100
ETIM 3.0
EC000899
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
Bending test turns
135
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test duration per axis
5 h
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/15
64 mm
Conductor cross section flexible min.
0.2 mm²
Cross section with insertion bridge, solid max.
4 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 9.0
27141116
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
Testing the rated value of the power dissipation (overload and short circuit Protection)
Test passed
Result of thermal test
Test passed
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Shock form
Half-sine
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Length
72.5 mm
Conductor cross section solid min.
0.2 mm²
Conductor cross section AWG min.
24
2 conductors with same cross section, solid min.
0.2 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ECLASS 7.0
27141116
ETIM 7.0
EC000899
UNSPSC 12.01
39121410
2 conductors with same cross section, solid max.
1.5 mm²
Internal cylindrical gage
A4
Tightening torque max
0.8 Nm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141116
ECLASS 6.0
27141100
ETIM 4.0
EC000899
UNSPSC 11
39121410
UNSPSC 20.0
39121410
Maximum load current
6.3 A
Flammability rating according to UL 94
V2
Overvoltage category
III
Nominal voltage UN
800 V (As a fuse terminal block)
Finger protection
guaranteed
Power frequency withstand voltage setpoint
2 kV
Number of levels
1
Nominal cross section
4 mm²
Rated operating voltage
250 V
Note
Swing the locking lever to its final position before replacing the fuse.
Insulating material
PA
Nominal current IN
6.3 A
Open side panel
No
Surge voltage test setpoint
9.8 kV
Result of flexion and pull-out test
Test passed
Number of connections
2
Maximum power dissipation for nominal condition
1.02 W
Rated surge voltage
8 kV
Insulating material group
I
Fuse type
Glass / ceramics / ...
Result of surge voltage test
Test passed
Compatibitity between modular fuse terminal block and fuse insert
Test passed
Actuatiing forces on plug in or lever in fuse insert carriers
Test passed
Color
yellow
Degree of pollution
3
Connection in acc. with standard
CSA
Fuse
G / 5 x 20 / 5 x 25 / 5 x 30
Back of the hand protection
guaranteed
Result of tight fit on support
Test passed
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of power-frequency withstand voltage test
Test passed
Contact resistance
Test passed
Bending test rotation speed
10 rpm
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²