3059236 Phoenix Contact Terminal Blocks
Part#:3059236
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
About the product: Feed-through terminal block with bolt connection method, cross section: 0.1 - 10 mm², AWG: 26 - 8, width 13 mm, color: gray
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 3059236 Phoenix Contact price in the box on the right side or send a quick quote.
3059236 Product Details
- Number of connections 16
- Insulating material PA
- Overvoltage category III
- Maximum load current 57 A (with 10 mm² conductor cross section)
- Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed
- Requirement temperature-rise test Increase in temperature ≤ 45 K
- Nominal voltage UN 800 V
- Open side panel Yes
- Result of voltage-drop test Test passed
- Conductor cross section short circuit testing 10 mm²
- Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03
- Test frequency f1 = 5 Hz to f2 = 150 Hz
- Shock duration 30 ms
- Specific optical density of smoke NFPA 130 (ASTM E 662) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
- Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
- Connection method Bolt connection
- Cable lug connection according to standard DIN 46237:1970-07
- AWG min 20
- Bolt diameter 5 mm
- Tightening torque max 22 Nm
- Ambient temperature (assembly) -5 °C ... 70 °C
- ECLASS 4.0 27141100
- ECLASS 6.0 27141100
- ETIM 2.0 EC000897
- UNSPSC 6.01 30211811
- UNSPSC 19.0 39121410
- Number of levels 1
- Color gray
- Flammability rating according to UL 94 V0
- Maximum power dissipation for nominal condition 1.82 W
- Shock protection test specification IEC 60529:2001-02
- Power frequency withstand voltage setpoint 2 kV
- Short-time current 1.2 kA
- ASD level 1.857 (m/s2)2/Hz
- Shock test result Test passed
- Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
- Height 37 mm
- Screw thread M5
- Min. cross section for cable lug connection 0.5 mm²
- Hole diameter, min. 5.3 mm
- UNSPSC 21.0 39121410
- Nominal cross section 10 mm²
- Degree of pollution 3
- Nominal current IN 57 A
- Result of power-frequency withstand voltage test Test passed
- Result of temperature-rise test Test passed
- Result of thermal test Test passed
- Test spectrum Service life test category 1, class B, body mounted
- Test duration per axis 5 h
- Static insulating material application in cold -60 °C
- Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg
- Length 53.3 mm
- Stripping length The stripping length depends on the specification provided by the cable lug manufacturer.
- Cable lug width, max. 10 mm
- Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
- ECLASS 10.0.1 27141120
- ECLASS 5.0 27141100
- ECLASS 9.0 27141120
- ETIM 7.0 EC000897
- UNSPSC 7.0901 39121410
- UNSPSC 13.2 39121410
- Potentials 8
- Rated surge voltage 8 kV
- Insulating material group I
- Back of the hand protection guaranteed
- Result of surge voltage test Test passed
- Short circuit stability result Test passed
- Oscillation, broadband noise test result Test passed
- Acceleration 5g
- Shock form Half-sine
- Relative insulation material temperature index (Elec., UL 746 B) 130 °C
- Smoke gas toxicity NFPA 130 (SMP 800C) passed
- Width 121.7 mm
- Connection 1 level
- Max. cross section for cable lug connection 6 mm²
- Operating temperature -60 °C ... 105 °C (max. short-term operating temperature 130°C)
- Ambient temperature (actuation) -5 °C ... 70 °C
- ECLASS 4.1 27141100
- ECLASS 7.0 27141120
- ETIM 6.0 EC000897
- UNSPSC 12.01 39121410
- Proof of thermal characteristics (needle flame) effective duration 30 s
- Test directions X-, Y- and Z-axis (pos. and neg.)
- Number of shocks per direction 3
- Surface flammability NFPA 130 (ASTM E 162) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
- Pitch 13 mm
- Connection in acc. with standard IEC 60947-7-1
- AWG max 10
- Tightening torque, min 2 Nm
- Permissible humidity (storage/transport) 30 % ... 70 %
- China RoHS Environmentally friendly use period: unlimited = EFUP-e
- ECLASS 11.0 27141120
- ECLASS 5.1 27141100
- ETIM 3.0 EC000897
- ETIM 4.0 EC000897
- UNSPSC 11 39121410
- UNSPSC 18.0 39121410
- UNSPSC 20.0 39121410
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
3059236
Select Qty:
Average response time: 11 minutes
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨