Bryan Obida

Live support:

Monday - Friday 6AM - 6PM PST

3058350 Phoenix Contact Terminal Blocks

Phoenix Contact 3058350 Feed-through terminal block, nom. voltage: 1000 V, nominal current: 125 A, connection method: Screw connection, number of connections: 2, cross section: 10 mm² - 35 mm², AWG: 8 - 2, width: 16 mm, color: blue, mounting type: NS 35/7,5, NS 35/15
Phoenix Contact

Part#:3058350

Manufacturer:Phoenix Contact

Product Lifecycle:Active

In-stock parts: 45

Nov 6, 2024

Feed-through terminal block, nom. voltage: 1000 V, nominal current: 125 A, connection method: Screw connection, number of connections: 2, cross section: 10 mm² - 35 mm², AWG: 8 - 2, width: 16 mm, color: blue, mounting type: NS 35/7,5, NS 35/15

About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.

Check out the 3058350 Phoenix Contact price in the box on the right side or send a quick quote.

Product Details

  • Number of levels
    1
  • Flammability rating according to UL 94
    V0
  • Maximum power dissipation for nominal condition
    4.06 W
  • Nominal voltage UN
    1000 V
  • Power frequency withstand voltage setpoint
    2.2 kV
  • Bending test rotation speed
    10 rpm
  • Setpoint
    10 N
  • Result of temperature-rise test
    Test passed
  • Test spectrum
    Service life test category 1, class B, body mounted
  • Test frequency
    f1 = 5 Hz to f2 = 150 Hz
  • Nominal cross section
    35 mm²
  • Insulating material group
    I
  • Shock protection test specification
    IEC 60529:2001-02
  • Back of the hand protection
    guaranteed
  • Result of the test for mechanical stability of terminal points (5 x conductor connection)
    Test passed
  • Tight fit on carrier
    NS 35
  • Requirement temperature-rise test
    Increase in temperature ≤ 45 K
  • Test specification, oscillation, broadband noise
    DIN EN 50155 (VDE 0115-200):2008-03
  • Potentials
    1
  • Rated surge voltage
    8 kV
  • Maximum load current
    125 A
  • Finger protection
    guaranteed
  • Note
    Terminal point
  • Result of flexion and pull-out test
    Test passed
  • Bending test turns
    135
  • Connection method
    Screw connection
  • Tightening torque, min
    3.2 Nm
  • Conductor cross section flexible min.
    10 mm²
  • Conductor cross section AWG max.
    2
  • Conductor cross section flexible, with ferrule with plastic sleeve max.
    35 mm²
  • 2 conductors with same cross section, stranded max.
    10 mm²
  • Number of connections
    2
  • Color
    blue
  • Degree of pollution
    3
  • Open side panel
    No
  • Result of power-frequency withstand voltage test
    Test passed
  • Tensile test result
    Test passed
  • Result of tight fit on support
    Test passed
  • Short-time current
    4.2 kA
  • ASD level
    1.857 (m/s2)2/Hz
  • Fire protection for rail vehicles (DIN EN 45545-2) R26
    HL 1 - HL 3
  • Tightening torque max
    3.7 Nm
  • Insulating material
    PA
  • Overvoltage category
    III
  • Nominal current IN
    125 A
  • Result of surge voltage test
    Test passed
  • Bending test conductor cross section/weight
    10 mm² / 2 kg
  • Result of voltage-drop test
    Test passed
  • Conductor cross section short circuit testing
    35 mm²
  • Height NS 35/7,5
    62 mm
  • Screw thread
    M6
  • Connection in acc. with standard
    IEC 60947-7-1
  • Conductor cross section AWG min.
    8
  • Max. AWG conductor cross section, flexible
    2
  • 2 conductors with same cross section, solid min.
    6 mm²
  • 2 conductors with same cross section, solid max.
    16 mm²
  • Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
    10 mm²
  • China RoHS
    Environmentally friendly use period: unlimited = EFUP-e
  • ECLASS 4.1
    27141100
  • ETIM 2.0
    EC000897
  • ETIM 6.0
    EC000897
  • UNSPSC 6.01
    30211811
  • UNSPSC 21.0
    39121410
  • Acceleration
    5g
  • Test directions
    X-, Y- and Z-axis (pos. and neg.)
  • Specific optical density of smoke NFPA 130 (ASTM E 662)
    passed
  • Fire protection for rail vehicles (DIN EN 45545-2) R23
    HL 1 - HL 3
  • Width
    16 mm
  • Stripping length
    16 mm
  • Conductor cross section solid min.
    10 mm²
  • Conductor cross section flexible max.
    35 mm²
  • Conductor cross section flexible, with ferrule without plastic sleeve min.
    10 mm²
  • Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
    6 mm²
  • Operating temperature
    -60 °C ... 105 °C (max. short-term operating temperature 130°C)
  • Ambient temperature (storage/transport)
    -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
  • Ambient temperature (actuation)
    -5 °C ... 70 °C
  • ECLASS 5.1
    27141100
  • ETIM 4.0
    EC000897
  • UNSPSC 13.2
    39121410
  • Number of shocks per direction
    3
  • Smoke gas toxicity NFPA 130 (SMP 800C)
    passed
  • Length
    54.5 mm
  • Height NS 35/15
    69.5 mm
  • Conductor cross section solid max.
    35 mm²
  • Conductor cross section flexible, with ferrule without plastic sleeve max.
    35 mm²
  • 2 conductors with same cross section, stranded min.
    6 mm²
  • Ambient temperature (assembly)
    -5 °C ... 70 °C
  • ECLASS 10.0.1
    27141120
  • ECLASS 5.0
    27141100
  • ECLASS 7.0
    27141120
  • UNSPSC 11
    39121410
  • UNSPSC 20.0
    39121410
  • Min. AWG conductor cross section, flexible
    8
  • Conductor cross section flexible, with ferrule with plastic sleeve min.
    10 mm²
  • Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
    10 mm²
  • Permissible humidity (storage/transport)
    30 % ... 70 %
  • ECLASS 4.0
    27141100
  • ECLASS 6.0
    27141100
  • ETIM 7.0
    EC000897
  • UNSPSC 7.0901
    39121410
  • UNSPSC 18.0
    39121410
  • Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
    6 mm²
  • ECLASS 11.0
    27141120
  • ECLASS 9.0
    27141120
  • ETIM 3.0
    EC000897
  • UNSPSC 12.01
    39121410
  • UNSPSC 19.0
    39121410
  • Short circuit stability result
    Test passed
  • Oscillation, broadband noise test result
    Test passed
  • Test duration per axis
    5 h
  • Shock form
    Half-sine
  • Fire protection for rail vehicles (DIN EN 45545-2) R24
    HL 1 - HL 3
  • Surface flammability NFPA 130 (ASTM E 162)
    passed
  • Fire protection for rail vehicles (DIN EN 45545-2) R22
    HL 1 - HL 3
  • Shock duration
    30 ms
  • Static insulating material application in cold
    -60 °C
  • Calorimetric heat release NFPA 130 (ASTM E 1354)
    28 MJ/kg
  • Proof of thermal characteristics (needle flame) effective duration
    30 s
  • Test specification, shock test
    DIN EN 50155 (VDE 0115-200):2008-03
  • Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
    130 °C
  • Result of thermal test
    Test passed
  • Shock test result
    Test passed
  • Relative insulation material temperature index (Elec., UL 746 B)
    130 °C

Product condition

ORIGINAL PACKAGING

SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging


This item can ship within 24h!

1-year warranty

$13.48

Stock:

45

Select Qty:

$13.48

$13.48 each

By purchasing this item, you agree to the Terms & Conditions

Quotebeam is NOT an authorized distributor of Phoenix Contact

Shipping and Delivery Worldwide

calculate costs and time


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Phoenix Contact Disclaimer:

The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo