3058114 Phoenix Contact Terminal Blocks
Part#:3058114
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 51
Nov 24, 2024
Test disconnect terminal block, nom. voltage: 800 V, nominal current: 50 A, connection method: Bolt connection, length: 79.9 mm, width: 13 mm, color: gray, mounting: NS 35/7,5, NS 35/15, NS 32
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 3058114 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Insulating material PA
- Overvoltage category III
- Nominal current IN 50 A
- Open side panel Yes
- Setpoint 5 N
- Result of temperature-rise test Test passed
- Test frequency f1 = 5 Hz to f2 = 250 Hz
- Test directions X-, Y- and Z-axis (pos. and neg.)
- Number of shocks per direction 3
- Surface flammability NFPA 130 (ASTM E 162) passed
- Specific optical density of smoke NFPA 130 (ASTM E 662) passed
- Height NS 35/15 54.5 mm
- Connection in acc. with standard UL
- Color gray
- Degree of pollution 3
- Maximum power dissipation for nominal condition 1.82 W
- Power frequency withstand voltage setpoint 2 kV
- Result of voltage-drop test Test passed
- Result of thermal test Test passed
- Test spectrum Service life test category 2, bogie-mounted
- Shock test result Test passed
- Static insulating material application in cold -60 °C
- Smoke gas toxicity NFPA 130 (SMP 800C) passed
- End cover width 2.2 mm
- Length 79.9 mm
- Height NS 35/7,5 47 mm
- AWG min 20
- Tightening torque, min 2 Nm
- Tightening torque max 2.2 Nm
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 10.0.1 27141126
- ECLASS 6.0 27141100
- ETIM 2.0 EC000902
- UNSPSC 6.01 30211811
- UNSPSC 21.0 39121410
- Number of levels 1
- Potentials 1
- Rated surge voltage 8 kV
- Result of surge voltage test Test passed
- Result of power-frequency withstand voltage test Test passed
- Tight fit on carrier NS 32/NS 35
- Short-time current 1.2 kA
- Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03
- Acceleration 30g
- Shock duration 18 ms
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
- Connection 1 level
- Connection method Bolt connection
- Bolt diameter 5 mm
- Operating temperature -60 °C ... 105 °C (max. short-term operating temperature 130°C)
- Ambient temperature (assembly) -5 °C ... 70 °C
- ECLASS 4.0 27141100
- ETIM 6.0 EC000902
- UNSPSC 13.2 39121410
- Number of connections 2
- Insulating material group I
- Nominal voltage UN 800 V (with open 630 V disconnect point)
- Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed
- Requirement temperature-rise test Increase in temperature ≤ 45 K
- Conductor cross section short circuit testing 10 mm²
- Proof of thermal characteristics (needle flame) effective duration 30 s
- Test duration per axis 5 h
- Shock form Half-sine
- Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
- Width 13 mm
- Pitch 13 mm
- Cable lug connection according to standard DIN 46237:1970-07
- Max. cross section for cable lug connection 6 mm²
- Screw thread M5
- Permissible humidity (storage/transport) 30 % ... 70 %
- ECLASS 11.0 27141126
- ECLASS 9.0 27141126
- ETIM 7.0 EC000902
- UNSPSC 18.0 39121410
- Nominal cross section 10 mm²
- Flammability rating according to UL 94 V0
- Maximum load current 50 A (with 10 mm² conductor cross section)
- Result of tight fit on support Test passed
- Short circuit stability result Test passed
- Oscillation, broadband noise test result Test passed
- ASD level 6.12 (m/s2)2/Hz
- Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03
- Relative insulation material temperature index (Elec., UL 746 B) 130 °C
- Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg
- Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
- Height NS 32 52 mm
- Stripping length The stripping length depends on the specification provided by the cable lug manufacturer.
- Min. cross section for cable lug connection 0.5 mm²
- Hole diameter, min. 5.3 mm
- Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
- REACh SVHC Lead 7439-92-1
- ECLASS 4.1 27141100
- ECLASS 5.1 27141100
- UNSPSC 7.0901 39121410
- UNSPSC 12.01 39121410
- UNSPSC 20.0 39121410
- AWG max 10
- Cable lug width, max. 10 mm
- Ambient temperature (actuation) -5 °C ... 70 °C
- ECLASS 5.0 27141100
- ECLASS 7.0 27141126
- ETIM 3.0 EC000902
- ETIM 4.0 EC000902
- UNSPSC 11 39121410
- UNSPSC 19.0 39121410
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
This item can ship within 24h!
1-year warranty
$3.34
Stock:
51
Select Qty:
$3.34
$3.34 each
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨