3058169 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  2
• Overvoltage category
  III
• Maximum load current
  50 A (with 10 mm² conductor cross section)
• Open side panel
  Yes
• Power frequency withstand voltage setpoint
  2 kV
• Short-time current
  1.2 kA
• Test spectrum
  Service life test category 1, class B, body mounted
• ASD level
  0.02 g²/Hz
• Nominal cross section
  10 mm²
• Degree of pollution
  3
• Maximum power dissipation for nominal condition
  1.82 W
• Nominal voltage UN
  800 V (with open 630 V disconnect point)
• Result of temperature-rise test
  Test passed
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Oscillation, broadband noise test result
  Test passed
• Test frequency
  f1 = 5 Hz to f2 = 150 Hz
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
Connection method
Bolt connection
Min. cross section for cable lug connection
0.5 mm²
AWG max
10
Bolt diameter
5 mm
REACh SVHC
Lead 7439-92-1
ECLASS 4.0
27141100
ECLASS 7.0
27141126
ETIM 4.0
EC000902
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
UNSPSC 18.0
39121410
Number of levels
1
Color
gray
Flammability rating according to UL 94
V0
Rated surge voltage
8 kV
Nominal current IN
50 A
Result of surge voltage test
Test passed
Conductor cross section short circuit testing
10 mm²
Acceleration
5g
Shock test result
Test passed
Shock duration
30 ms
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
End cover width
10 mm
Height
39.7 mm
Stripping length
The stripping length depends on the specification provided by the cable lug manufacturer.
AWG min
20
Hole diameter, min.
5.3 mm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (actuation)
-5 °C ... 70 °C
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 9.0
27141126
ETIM 7.0
EC000902
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
Potentials
1
Insulating material
PA
Insulating material group
I
Result of power-frequency withstand voltage test
Test passed
Result of voltage-drop test
Test passed
Short circuit stability result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock form
Half-sine
Surface flammability NFPA 130 (ASTM E 162)
passed
Width
13 mm
Cable lug connection according to standard
DIN 46237:1970-07
Cable lug width, max.
10 mm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ECLASS 6.0
27141100
UNSPSC 11
39121410
UNSPSC 21.0
39121410
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Length
79.9 mm
Connection
1 level
Max. cross section for cable lug connection
6 mm²
Screw thread
M5
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141126
ECLASS 5.0
27141100
ETIM 2.0
EC000902
ETIM 6.0
EC000902
UNSPSC 19.0
39121410
Test duration per axis
5 h
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Pitch
13 mm
Connection in acc. with standard
UL
Tightening torque, min
2 Nm
Tightening torque max
2.2 Nm
ECLASS 11.0
27141126
ECLASS 5.1
27141100
ETIM 3.0
EC000902
UNSPSC 7.0901
39121410