3057364 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  2
• Rated surge voltage
  6 kV
• Number of levels
  1
• Insulating material
  PA
• Insulating material group
  I
• Nominal cross section
  6 mm²
• Flammability rating according to UL 94
  V0
• Back of the hand protection
  guaranteed
• Result of surge voltage test
  Test passed
• Tight fit on carrier
  NS 32/NS 35
• Result of temperature-rise test
  Test passed
• Color
  white
• Overvoltage category
  III
• Open side panel
  Yes
• Bending test turns
  135
• Setpoint
  5 N
• Potentials
  1
• Degree of pollution
  3
• Tensile test result
  Test passed
• Bending test rotation speed
  10 rpm
Conductor cross section short circuit testing
10 mm²
Surface flammability NFPA 130 (ASTM E 162)
passed
Width
8.2 mm
Height NS 35/7,5
51.5 mm
Connection method
Screw connection
Screw thread
M4
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Conductor cross section solid min.
0.5 mm²
Conductor cross section solid max.
10 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
4 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141126
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of voltage-drop test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Result of thermal test
Test passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible min.
0.5 mm²
Length
72 mm
Height NS 32
56.5 mm
Stripping length
13 mm
Power frequency withstand voltage setpoint
1.89 kV
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Short-time current
1.2 kA
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
End cover width
2.2 mm
Maximum load current
57 A (with 10 mm² conductor cross section)
Shock protection test specification
IEC 60529:2001-02
Note
Terminal point
Tightening torque max
1.5 Nm
Conductor cross section AWG max.
8
Conductor cross section flexible max.
6 mm²
Max. AWG conductor cross section, flexible
10
2 conductors with same cross section, stranded min.
0.5 mm²
Maximum power dissipation for nominal condition
1.31 W
Nominal current IN
41 A
Result of flexion and pull-out test
Test passed
Result of tight fit on support
Test passed
Nominal voltage UN
400 V
Result of power-frequency withstand voltage test
Test passed
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Short circuit stability result
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/15
59 mm
Connection
1 level
Tightening torque, min
1.2 Nm
Conductor cross section AWG min.
20
Min. AWG conductor cross section, flexible
20
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Internal cylindrical gage
A5
ECLASS 4.1
27141100
UNSPSC 21.0
39121410
2 conductors with same cross section, stranded max.
6 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ETIM 3.0
EC000489
UNSPSC 6.01
30211811
UNSPSC 20.0
39121410
UNSPSC 18.0
39121410
ECLASS 4.0
27141100
ECLASS 9.0
27141126
UNSPSC 7.0901
39121410
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
4 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
2 conductors with same cross section, solid max.
2.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.5 mm²
ECLASS 11.0
27141126
ECLASS 5.1
27141100
UNSPSC 12.01
39121410
ECLASS 7.0
27141126
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 6.0
27141100
ETIM 6.0
EC000902
ETIM 4.0
EC000489
UNSPSC 11
39121410
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
ECLASS 5.0
27141100
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
2 conductors with same cross section, solid min.
0.5 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ETIM 7.0
EC000902
UNSPSC 19.0
39121410
UNSPSC 13.2
39121410