3057432 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  2
• Nominal cross section
  4 mm²
• Rated surge voltage
  6 kV
• Open side panel
  Yes
• Result of tight fit on support
  Test passed
• Oscillation, broadband noise test result
  Test passed
• Short-time current
  1.25 kA
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Static insulating material application in cold
  -60 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Height NS 35/15
  57 mm
• Conductor cross section solid max.
  6 mm²
• Conductor cross section solid min.
  0.14 mm²
• 2 conductors with same cross section, solid max.
  1.5 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve max.
  4 mm²
• Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
  0.14 mm²
• Permissible humidity (storage/transport)
  30 % ... 70 %
• Potentials
  1
Flammability rating according to UL 94
V0
Maximum power dissipation for nominal condition
1.02 W
Result of surge voltage test
Test passed
Setpoint
1 N
Acceleration
5g
Shock form
Half-sine
Number of shocks per direction
3
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Height NS 35/7,5
49.5 mm
Connection in acc. with standard
CSA
Conductor cross section AWG max.
10
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141126
ECLASS 4.1
27141100
ECLASS 7.0
27141126
UNSPSC 12.01
39121410
UNSPSC 11
39121410
UNSPSC 20.0
39121410
Number of levels
1
Color
gray
Maximum load current
28 A
Tight fit on carrier
NS 35
Result of thermal test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Shock test result
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
86.5 mm
Connection method
Screw/plug-in connection
Conductor cross section AWG min.
26
Max. AWG conductor cross section, flexible
12
2 conductors with same cross section, solid min.
0.14 mm²
Insulating material
PA
Insulating material group
I
Nominal current IN
28 A
Short circuit stability result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
ASD level
0.02 g²/Hz
Test duration per axis
5 h
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Screw thread
M3
Tightening torque max
0.8 Nm
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
UNSPSC 18.0
39121410
Overvoltage category
III
Conductor cross section short circuit testing
4 mm²
Surface flammability NFPA 130 (ASTM E 162)
passed
Stripping length
9 mm
Conductor cross section flexible max.
4 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141126
ECLASS 6.0
27141100
ECLASS 9.0
27141126
UNSPSC 7.0901
39121410
UNSPSC 13.2
39121410
UNSPSC 19.0
39121410
Nominal voltage UN
500 V
Shock duration
30 ms
Width
6.2 mm
Tightening torque, min
0.6 Nm
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
China RoHS
Environmentally Friendly Use Period = 50 years
ETIM 3.0
EC000902
ETIM 6.0
EC000902
Test spectrum
Service life test category 1, class B, body mounted
End cover width
2.2 mm
2 conductors with same cross section, stranded min.
0.14 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm²
ECLASS 5.1
27141100
ECLASS 5.0
27141100
ETIM 2.0
EC000902
ETIM 7.0
EC000902
Internal cylindrical gage
A4
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ETIM 4.0
EC000902
UNSPSC 6.01
30211811
UNSPSC 21.0
39121410