3057267 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  1
• Degree of pollution
  3
• Connection in acc. with standard
  CSA
• Open side panel
  No
• Result of power-frequency withstand voltage test
  Test passed
• Nominal cross section
  4 mm²
• Area of application
  Railway industry
• Insulating material group
  I
• Back of the hand protection
  guaranteed
• Surge voltage test setpoint
  7.3 kV
• Result of flexion and pull-out test
  Test passed
• Bending test turns
  135
• Setpoint
  1 N
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Test frequency
  f1 = 5 Hz to f2 = 150 Hz
• Test spectrum
  Service life test category 1, class B, body mounted
• Shock form
  Half-sine
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Width
  6.2 mm
Height NS 35/7,5
49.1 mm
Height NS 35/15
56.6 mm
2 conductors with same cross section, solid min.
0.14 mm²
Insulating material
PA
Rated surge voltage
6 kV
Shock protection test specification
IEC 60529:2001-02
Result of surge voltage test
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Oscillation, broadband noise test result
Test passed
Test duration per axis
5 h
Shock test result
Test passed
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Conductor cross section flexible min.
0.14 mm²
Conductor cross section AWG max.
10
2 conductors with same cross section, stranded min.
0.14 mm²
Stripping length
9 mm
Tightening torque max
0.8 Nm
ECLASS 11.0
27141126
ECLASS 7.0
27141126
ETIM 7.0
EC000902
UNSPSC 11
39121410
Flammability rating according to UL 94
V0
Overvoltage category
III
Maximum load current
20 A (with 6 mm² conductor cross section)
Nominal voltage UN
500 V
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Conductor cross section tensile test
6 mm²
Short-time current
0.3 kA
Short circuit stability result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock duration
30 ms
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Conductor cross section flexible max.
6 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.0
27141117
ETIM 3.0
EC000902
ETIM 6.0
EC000902
UNSPSC 6.01
30211811
UNSPSC 19.0
39121410
Number of connections
2
Color
yellow
Nominal current IN
20 A
Maximum power dissipation for nominal condition
1.02 W
Finger protection
guaranteed
Power frequency withstand voltage setpoint
1.89 kV
Tractive force setpoint
80 N
Result of voltage-drop test
Test passed
Result of thermal test
Test passed
ASD level
1.857 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Length
57.8 mm
Conductor cross section AWG min.
26
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
2 conductors with same cross section, solid max.
1.5 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Connection method
Screw connection
Internal cylindrical gage
A4
Screw thread
M3
ECLASS 4.1
27141117
ECLASS 6.0
27141100
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
Bending test rotation speed
10 rpm
Tight fit on carrier
NS 35
Requirements, voltage drop
≤ 6,4 mV
Conductor cross section short circuit testing
2.5 mm²
Acceleration
5g
Number of shocks per direction
3
Static insulating material application in cold
-60 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Conductor cross section solid min.
0.14 mm²
Conductor cross section solid max.
6 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Tightening torque, min
0.6 Nm
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 10.0.1
27141126
ECLASS 5.0
27141100
ETIM 2.0
EC000902
ECLASS 9.0
27141126
UNSPSC 18.0
39121410
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.14 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.1
27141100
ETIM 4.0
EC000902
UNSPSC 7.0901
39121410
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410