3048823 Phoenix Contact Terminal Blocks

3048823 Product Details

• Insulating material
  PA
• Tight fit on carrier
  NS 32/NS 35
• Insulating material group
  I
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Operating temperature
  -60 °C ... 105 °C (max. short-term operating temperature 130°C)
• ECLASS 4.0
  27141100
• Internal cylindrical gage
  A4
• ECLASS 10.0.1
  27141120
• ECLASS 5.1
  27141100
• UNSPSC 11
  39121410
• Connection
  1 level
• ETIM 7.0
  EC000897
• UNSPSC 6.01
  30211811
• UNSPSC 20.0
  39121410
• Permissible humidity (storage/transport)
  30 % ... 70 %
• ETIM 6.0
  EC000897
• UNSPSC 7.0901
  39121410
• UNSPSC 21.0
  39121410
• UNSPSC 18.0
  39121410
• UNSPSC 19.0
  39121410
Nominal cross section
4 mm²
Result of surge voltage test
Test passed
Result of thermal test
Test passed
Acceleration
30g
Shock duration
18 ms
Tightening torque, min
0.6 Nm
Result of power-frequency withstand voltage test
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Number of shocks per direction
3
ASD level
6.12 (m/s2)2/Hz
Width
6.2 mm
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 11.0
27141120
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Connection method
Screw connection
2 conductors with same cross section, solid min.
0.14 mm²
Maximum load current
37 A (In the case of a 6 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors)
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Screw thread
M3
Connection in acc. with standard
IEC 60947-7-1
Bending test rotation speed
10 (+/- 2) rpm
Height NS 35/7,5
50 mm
Stripping length
9 mm
Tightening torque max
0.8 Nm
Conductor cross section AWG max.
10
Conductor cross section AWG min.
26
Max. AWG conductor cross section, flexible
10
2 conductors with same cross section, stranded min.
0.14 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.1
27141100
Requirements, voltage drop
U1 ≤ 3.2 mV; U2 ≤ 1.5 x U1
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section solid min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.14 mm²
Conductor cross section short circuit testing
6 mm²
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
End cover width
2.2 mm
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
2 conductors with same cross section, solid max.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
ECLASS 9.0
27141120
UNSPSC 13.2
39121410
Conductor cross section flexible max.
6 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 7.0
27141120
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
ETIM 4.0
EC000897
ECLASS 5.0
27141100
ECLASS 6.0
27141100
UNSPSC 12.01
39121410
Overvoltage category
III
Back of the hand protection
guaranteed
Nominal current IN
32 A
Conductor cross section tensile test
6 mm²
Number of levels
1
Flammability rating according to UL 94
V0
Open side panel
Yes
Finger protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Short-time current
0.72 kA
Surge voltage test setpoint
9.6 kV
Result of flexion and pull-out test
Test passed
Tensile test result
Test passed
Setpoint
1 N
Short circuit stability result
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock form
Half-sine
Static insulating material application in cold
-60 °C
Nominal voltage UN
1000 V
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Test duration per axis
5 h
Shock protection test specification
IEC 60529:2001-02
Bending test turns
135
Tractive force setpoint
80 N
Result of voltage-drop test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Length
65.4 mm
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test directions
X-, Y- and Z-axis (pos. and neg.)
Potentials
1
Maximum power dissipation for nominal condition
1.02 W
Power frequency withstand voltage setpoint
2.2 kV
Color
gray
Degree of pollution
3
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Height NS 35/15
57.5 mm
Conductor cross section solid max.
6 mm²
Conductor cross section flexible min.
0.14 mm²
Number of connections
4
Rated surge voltage
6 kV

Product condition