3048386 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  1
• Maximum power dissipation for nominal condition
  2.43 W
• Overvoltage category
  III
• Nominal voltage UN
  690 V AC (the current and voltage are determined by the fuse)
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Result of surge voltage test
  Test passed
• ETIM 7.0
  EC000899
• ETIM 3.0
  EC000899
• UNSPSC 18.0
  39121410
• Flammability rating according to UL 94
  V2
• Insulating material group
  III a
• Fuse type
  Glass / ceramics / ...
• Finger protection
  guaranteed
• Contact resistance
  Test passed
• Bending test conductor cross section/weight
  1.5 mm² / 0.4 kg
• Conductor cross section solid max.
  25 mm²
• Conductor cross section AWG min.
  16
• Cross section with insertion bridge, stranded max.
  10 mm²
• Internal cylindrical gage
  A7
• UNSPSC 20.0
  39121410
Nominal cross section
16 mm²
Rated surge voltage
6 kV
Connection in acc. with standard
CSA
Result of power-frequency withstand voltage test
Test passed
Result of thermal test
Test passed
Conductor cross section flexible min.
1.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
1.5 mm²
Operating temperature
-60 °C ... 85 °C
UNSPSC 12.01
39121410
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410
Number of connections
2
Degree of pollution
3
Nominal current IN
32 A (the current and voltage are determined by the fuse)
Open side panel
No
Back of the hand protection
guaranteed
Result of tight fit on support
Test passed
UNSPSC 11
39121410
UNSPSC 19.0
39121410
Color
black
Maximum load current
32 A (the current and voltage are determined by the fuse)
Fuse
10:3 x 38 mm
Note
Swing the locking lever to its final position before replacing the fuse.
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test rotation speed
10 rpm
Width
18 mm
Length
81 mm
Cross section with insertion bridge, solid max.
10 mm²
2 conductors with same cross section, stranded min.
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
1.5 mm²
Tightening torque max
2.5 Nm
Result of flexion and pull-out test
Test passed
Height NS 35/7,5
65.5 mm
Conductor cross section flexible, with ferrule with plastic sleeve min.
1.5 mm²
2 conductors with same cross section, solid max.
4 mm²
2 conductors with same cross section, stranded max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
10 mm²
Tightening torque, min
2 Nm
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ECLASS 7.0
27141116
ETIM 4.0
EC000899
Bending test turns
135
Conductor cross section flexible max.
16 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
16 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
16 mm²
2 conductors with same cross section, solid min.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
1.5 mm²
Stripping length
11 mm
Screw thread
M5
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 6.0
27141100
ETIM 2.0
EC000897
Relative insulation material temperature index (Elec., UL 746 B)
125 °C
Height NS 35/15
73 mm
Conductor cross section solid min.
1.5 mm²
Conductor cross section AWG max.
4
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
4 mm²
Connection method
Screw connection
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 5.0
27141100
ECLASS 9.0
27141116
Ambient temperature (storage/transport)
-25 °C ... 55 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141116
ECLASS 10.0.1
27141116
ECLASS 5.1
27141100
ETIM 6.0
EC000899