3048658 Phoenix Contact Terminal Blocks

Product Details

• Nominal voltage UN
  630 V
• Open side panel
  No
• Color
  red
• Insulating material group
  I
• Flammability rating according to UL 94
  V2
• Degree of pollution
  3
• Potentials
  1
• Nominal cross section
  4 mm²
• Overvoltage category
  III
• Back of the hand protection
  guaranteed
• Power frequency withstand voltage setpoint
  1.89 kV
• Bending test turns
  135
• Tight fit on carrier
  NS 32/NS 35
• Conductor cross section short circuit testing
  6 mm²
• Relative insulation material temperature index (Elec., UL 746 B)
  125 °C
• End cover width
  1.5 mm
• Height NS 32
  52 mm
• Connection method
  Screw connection
• Stripping length
  8 mm
• Conductor cross section AWG min.
  24
Conductor cross section AWG max.
10
Conductor cross section flexible max.
4 mm²
Cross section with insertion bridge, solid max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Operating temperature
-60 °C ... 85 °C
Number of positions
1
Number of connections
4
Maximum load current
32 A (In the case of a 6 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors)
Maximum power dissipation for nominal condition
1.02 W
Shock protection test specification
IEC 60529:1989-11 + AMD 1:1999-11 + AMD 2:2013-08
Bending test rotation speed
10 rpm
Tensile test result
Test passed
Result of voltage-drop test
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Proof of thermal characteristics (needle flame) effective duration
30 s
Static insulating material application in cold
-60 °C
Length
63.5 mm
Connection
1 level
Tightening torque, min
0.5 Nm
Conductor cross section flexible min.
0.2 mm²
Max. AWG conductor cross section, flexible
12
Cross section with insertion bridge, stranded max.
2.5 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Ambient temperature (storage/transport)
-25 °C ... 55 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141120
ECLASS 5.1
27141100
ETIM 2.0
EC000897
ECLASS 7.0
27141120
UNSPSC 11
39121410
UNSPSC 20.0
39121410
Number of levels
1
Insulating material
PA
Rated surge voltage
8 kV
Nominal current IN
32 A (with 6 mm² conductor cross section)
Result of power-frequency withstand voltage test
Test passed
Result of surge voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Short circuit stability result
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Width
6.2 mm
Note
Terminal point
Tightening torque max
0.6 Nm
Connection in acc. with standard
CSA
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
2 conductors with same cross section, solid max.
1 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141120
ECLASS 4.1
27141100
ECLASS 9.0
27141120
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
UNSPSC 7.0901
39121410
Finger protection
guaranteed
Result of flexion and pull-out test
Test passed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Setpoint
1 N
Result of thermal test
Test passed
Short-time current
0.72 kA
Height NS 35/7,5
47 mm
Height NS 35/15
54.5 mm
Screw thread
M3
Conductor cross section solid min.
0.2 mm²
Conductor cross section solid max.
6 mm²
Min. AWG conductor cross section, flexible
24
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
2 conductors with same cross section, solid min.
0.2 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Internal cylindrical gage
A3
Ambient temperature (assembly)
-5 °C ... 70 °C
China RoHS
Environmentally Friendly Use Period = 50 years
ETIM 3.0
EC000897
ETIM 4.0
EC000897
ETIM 7.0
EC000897
UNSPSC 19.0
39121410
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 5.0
27141100
ECLASS 6.0
27141100
ETIM 6.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 18.0
39121410
UNSPSC 21.0
39121410