3048551 Phoenix Contact Terminal Blocks

Product Details

• Stripping length
  8 mm
• Rated surge voltage
  6 kV
• Nominal current IN
  16 A
• Maximum power dissipation for nominal condition
  1.02 W
• Bending test conductor cross section/weight
  0.2 mm² / 0.2 kg
• Setpoint
  1 N
• Result of thermal test
  Test passed
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Height NS 32
  63.5 mm
• Conductor cross section flexible max.
  4 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  4 mm²
• 2 conductors with same cross section, solid min.
  0.2 mm²
• 2 conductors with same cross section, stranded min.
  0.2 mm²
• Connection method
  Screw connection
• Tightening torque max
  0.6 Nm
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• ECLASS 4.0
  27141100
• ECLASS 11.0
  27141126
• ETIM 3.0
  EC000902
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
Cross section with insertion bridge, solid max.
4 mm²
Nominal cross section
4 mm²
Insulating material
PA
Open side panel
No
Surge voltage test setpoint
7.3 kV
Tensile test result
Test passed
Result of voltage-drop test
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Length
51 mm
Conductor cross section flexible min.
0.2 mm²
Conductor cross section AWG max.
10
2 conductors with same cross section, solid max.
1.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
REACh SVHC
Lead 7439-92-1
ECLASS 4.1
27141100
ECLASS 5.1
27141100
ETIM 2.0
EC000902
UNSPSC 18.0
39121410
Number of connections
2
Degree of pollution
3
Overvoltage category
III
Maximum load current
16 A (with 4 mm² conductor cross section)
Back of the hand protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Result of flexion and pull-out test
Test passed
Result of tight fit on support
Test passed
Tight fit on carrier
NS 32/NS 35
Result of temperature-rise test
Test passed
Short-time current
0.18 kA
Surface flammability NFPA 130 (ASTM E 162)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm²
Screw thread
M3
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141126
ECLASS 6.0
27141100
ETIM 6.0
EC000902
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
Number of levels
1
Flammability rating according to UL 94
V0
Connection in acc. with standard
CSA
Number of positions
1
Finger protection
guaranteed
Power frequency withstand voltage setpoint
1.89 kV
Tractive force setpoint
80 N
Requirements, voltage drop
≤ 6,4 mV
Conductor cross section short circuit testing
1.5 mm²
Proof of thermal characteristics (needle flame) effective duration
30 s
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/15
66 mm
Conductor cross section AWG min.
24
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Cross section with insertion bridge, stranded max.
4 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.0
27141100
ECLASS 9.0
27141126
ETIM 7.0
EC000902
UNSPSC 11
39121410
UNSPSC 19.0
39121410
Color
yellow
Insulating material group
I
Nominal voltage UN
500 V
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of surge voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Conductor cross section tensile test
6 mm²
Short circuit stability result
Test passed
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
6.2 mm
Height NS 35/7,5
58.5 mm
Conductor cross section solid max.
6 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Internal cylindrical gage
A3
Tightening torque, min
0.5 Nm
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 7.0
27141126
ETIM 4.0
EC000902
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410