3048441 Phoenix Contact Terminal Blocks

Product Details

• Potentials
  1
• Insulating material
  PA
• Maximum power dissipation for nominal condition
  1.02 W
• Nominal voltage UN
  800 V
• Finger protection
  guaranteed
• Power frequency withstand voltage setpoint
  2 kV
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Result of tight fit on support
  Test passed
• Short-time current
  0.48 kA
• Test spectrum
  Service life test category 2, bogie-mounted
• ASD level
  6.12 (m/s2)2/Hz
• Shock duration
  18 ms
• Height NS 35/15
  54.5 mm
• Connection in acc. with standard
  CSA
• Conductor cross section AWG max.
  10
• Conductor cross section flexible max.
  4 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  4 mm²
• 2 conductors with same cross section, stranded min.
  0.2 mm²
• Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
  1.5 mm²
• Ambient temperature (actuation)
  -5 °C ... 70 °C
ECLASS 4.0
27141100
ETIM 4.0
EC000897
UNSPSC 6.01
30211811
Insulating material group
I
Open side panel
Yes
Bending test rotation speed
10 (+/- 2) rpm
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Tight fit on carrier
NS 32/NS 35
Result of temperature-rise test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Acceleration
30g
Shock form
Half-sine
Connection method
Screw connection
Conductor cross section solid min.
0.2 mm²
Conductor cross section AWG min.
24
Max. AWG conductor cross section, flexible
12
2 conductors with same cross section, solid max.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
REACh SVHC
Lead 7439-92-1
ECLASS 5.1
27141100
ECLASS 6.0
27141100
UNSPSC 7.0901
39121410
UNSPSC 13.2
39121410
Number of levels
1
Nominal cross section
4 mm²
Degree of pollution
3
Maximum load current
41 A (with 6 mm² conductor cross section)
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of flexion and pull-out test
Test passed
Bending test turns
135
Tractive force setpoint
80 N
Short circuit stability result
Test passed
Result of thermal test
Test passed
Test duration per axis
5 h
Length
42.5 mm
Screw thread
M3
Tightening torque, min
0.6 Nm
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
2 conductors with same cross section, solid min.
0.2 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.1
27141100
ECLASS 7.0
27141120
UNSPSC 11
39121410
UNSPSC 18.0
39121410
Color
gray
Rated surge voltage
8 kV
Overvoltage category
III
Back of the hand protection
guaranteed
Result of surge voltage test
Test passed
Conductor cross section tensile test
6 mm²
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
4 mm²
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Width
6.2 mm
Height NS 32
52 mm
Stripping length
8 mm
Min. AWG conductor cross section, flexible
24
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Cross section with insertion bridge, stranded max.
4 mm²
Internal cylindrical gage
A4
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
ECLASS 5.0
27141100
ETIM 2.0
EC000897
ETIM 3.0
EC000897
ETIM 7.0
EC000897
UNSPSC 21.0
39121410
Number of connections
2
Flammability rating according to UL 94
V0
Nominal current IN
32 A
Result of power-frequency withstand voltage test
Test passed
Tensile test result
Test passed
Requirements, voltage drop
U1 ≤ 3.2 mV; U2 ≤ 1.5 x U1
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Proof of thermal characteristics (needle flame) effective duration
30 s
Number of shocks per direction
3
Height NS 35/7,5
47 mm
Tightening torque max
0.8 Nm
Conductor cross section solid max.
6 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Cross section with insertion bridge, solid max.
4 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141120
ECLASS 9.0
27141120
ETIM 6.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
UNSPSC 20.0
39121410