3044636 Phoenix Contact Terminal Blocks

3044636 Product Details

• Length
  69.9 mm
• Connection method
  Screw connection
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Conductor cross section solid max.
  4 mm²
• Degree of pollution
  3
• 2 conductors with same cross section, stranded max.
  1.5 mm²
• Internal cylindrical gage
  A3
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
  0.5 mm²
• Permissible humidity (storage/transport)
  30 % ... 70 %
• Tightening torque max
  0.6 Nm
• ETIM 4.0
  EC001329
• UNSPSC 13.2
  39121410
• Insulating material
  PA
• Rated surge voltage
  6 kV
• Nominal voltage UN
  500 V
• Open side panel
  Yes
• Power frequency withstand voltage setpoint
  1.89 kV
• Tensile test result
  Test passed
• Result of voltage-drop test
  Test passed
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
ASD level
1.857 (m/s2)2/Hz
Shock form
Half-sine
Number of shocks per direction
3
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 35/15
72.5 mm
Conductor cross section AWG max.
12
2 conductors with same cross section, stranded min.
0.14 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.14 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 10.0.1
27141120
ECLASS 6.0
27141100
UNSPSC 6.01
30211811
Color
gray
Area of application
Railway industry
Connection in acc. with standard
CSA
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of flexion and pull-out test
Test passed
Tractive force setpoint
60 N
Result of temperature-rise test
Test passed
Conductor cross section short circuit testing
4 mm²
Result of thermal test
Test passed
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
2 conductors with same cross section, solid min.
0.14 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 5.0
27141100
ECLASS 5.1
27141100
ETIM 6.0
EC000897
UNSPSC 11
39121410
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
30 ms
Width
5.2 mm
Short circuit stability result
Test passed
Acceleration
5g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
ECLASS 9.0
27141120
ETIM 7.0
EC000897
UNSPSC 21.0
39121410
Number of connections
4
Overvoltage category
III
Maximum power dissipation for nominal condition
0.77 W (the value is multiplied when connecting multiple levels)
Finger protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Conductor cross section tensile test
4 mm²
Tight fit on carrier
NS 35
Proof of thermal characteristics (needle flame) effective duration
30 s
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
End cover width
2.2 mm
Conductor cross section AWG min.
26
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.0
27141100
Requirements, voltage drop
≤ 3.2 mV
Oscillation, broadband noise test result
Test passed
Test duration per axis
5 h
Relative insulation material temperature index (Elec.; UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height
64.4 mm
Conductor cross section flexible min.
0.14 mm²
2 conductors with same cross section, solid max.
1.5 mm²
Screw thread
M3
Tightening torque, min
0.5 Nm
ECLASS 11.0
27141120
ECLASS 7.0
27141120
UNSPSC 20.0
39121410
Number of levels
2
Flammability rating according to UL 94
V0
Insulating material group
I
Nominal current IN
24 A
Result of surge voltage test
Test passed
Checking the mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test turns
135
Result of tight fit on support
Test passed
Conductor cross section solid min.
0.14 mm²
Bending test rotation speed
10 rpm
Setpoint
1 N
Short-time current
0.48 kA
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ETIM 3.0
EC000901
UNSPSC 19.0
39121410
UNSPSC 12.01
39121410
Nominal cross section
2.5 mm²
Maximum load current
28 A (in case of a 4 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.)
Back of the hand protection
guaranteed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Test spectrum
Service life test category 1, class B, body mounted
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Shock test result
Test passed
Static insulating material application in cold
-60 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Height NS 35/7,5
65 mm
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Stripping length
9 mm
Ambient temperature (assembly)
-5 °C ... 70 °C
ETIM 2.0
EC000901
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410

Product condition