3038150 Phoenix Contact Terminal Blocks

Product Details

• Nominal cross section
  6 mm²
• Flammability rating according to UL 94
  V0
• Insulating material group
  I
• Nominal current IN
  41 A
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Result of surge voltage test
  Test passed
• Bending test rotation speed
  10 rpm
• Result of temperature-rise test
  Test passed
• Oscillation, broadband noise test result
  Test passed
• Acceleration
  30g
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• End cover width
  2.2 mm
• Height NS 35/15
  57.5 mm
• Connection method
  Spring-cage connection
• Conductor cross section AWG max.
  8
• Min. AWG conductor cross section, flexible
  24
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  6 mm²
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
  1.5 mm²
• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ECLASS 5.0
27141100
ETIM 2.0
EC000897
ETIM 6.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
Number of connections
3
Rated surge voltage
8 kV
Maximum load current
57 A (with 10 mm² conductor cross section)
Finger protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of tight fit on support
Test passed
Tight fit on carrier
NS 35
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Short-time current
1.2 kA
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Potentials
1
Degree of pollution
3
Overvoltage category
III
Nominal voltage UN
800 V
Power frequency withstand voltage setpoint
2.2 kV
Bending test turns
135
Tensile test result
Test passed
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
10 mm²
Result of aging test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/7,5
50 mm
Stripping length
12 mm
Conductor cross section AWG min.
24
Conductor cross section flexible max.
6 mm²
Max. AWG conductor cross section, flexible
10
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
ECLASS 4.1
27141100
ECLASS 7.0
27141120
ECLASS 6.0
27141100
ETIM 3.0
EC000897
UNSPSC 11
39121410
UNSPSC 19.0
39121410
UNSPSC 21.0
39121410
Open side panel
Yes
Back of the hand protection
guaranteed
Result of flexion and pull-out test
Test passed
Setpoint
5 N
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Ageing test for screwless modular terminal block temperature cycles
192
Test duration per axis
5 h
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Width
8.2 mm
Connection
1 level
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.0
27141100
ECLASS 5.1
27141100
ECLASS 9.0
27141120
ETIM 4.0
EC000897
ETIM 7.0
EC000897
UNSPSC 18.0
39121410
UNSPSC 13.2
39121410
Number of levels
1
Color
gray
Insulating material
PA
Maximum power dissipation for nominal condition
1.31 W
Result of power-frequency withstand voltage test
Test passed
Bending test conductor cross section/weight
0.2 mm² / 0.3 kg
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Result of thermal test
Test passed
ASD level
6.12 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Shock test result
Test passed
Shock duration
18 ms
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Length
70 mm
Connection in acc. with standard
CSA
Conductor cross section solid max.
10 mm²
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Internal cylindrical gage
A5
UNSPSC 20.0
39121410