3036482 Phoenix Contact Terminal Blocks

Product Details

• ECLASS 4.0
  27141100
• ETIM 4.0
  EC000901
• ECLASS 9.0
  27141141
• ECLASS 6.0
  27141100
• UNSPSC 11
  39121410
• ETIM 7.0
  EC000901
• ETIM 6.0
  EC000901
• UNSPSC 13.2
  39121410
• UNSPSC 12.01
  39121410
• UNSPSC 20.0
  39121410
• Shock form
  Half-sine
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Width
  8.2 mm
• Stripping length
  12 mm
• Conductor cross section AWG max.
  8
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  6 mm²
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
  0.5 mm²
• ECLASS 10.0.1
  27141141
• ECLASS 5.1
  27141100
ETIM 3.0
EC000901
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
Open side panel
Yes
Finger protection
guaranteed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test duration per axis
5 h
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/7,5
43.5 mm
Connection method
Spring-cage connection
Conductor cross section solid min.
0.2 mm²
Min. AWG conductor cross section, flexible
24
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.1
27141100
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/15
51 mm
End cover width
2.2 mm
Connection in acc. with standard
CSA
Conductor cross section AWG min.
24
Max. AWG conductor cross section, flexible
10
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
Number of connections
3
Insulating material
PA
Degree of pollution
3
Overvoltage category
III
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Test spectrum
Service life test category 2, bogie-mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
18 ms
Insulating material group
I
Oscillation, broadband noise test result
Test passed
Acceleration
30g
Shock test result
Test passed
Static insulating material application in cold
-60 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Note
Please observe the current carrying capacity of the DIN rails.
Connection
1 level
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141141
ECLASS 7.0
27141141
Nominal cross section
6 mm²
Area of application
Railway industry
ASD level
6.12 (m/s2)2/Hz
Number of shocks per direction
3
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Length
90.5 mm
Conductor cross section solid max.
10 mm²
Conductor cross section flexible max.
6 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Internal cylindrical gage
A5
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 5.0
27141100
UNSPSC 19.0
39121410
UNSPSC 21.0
39121410
Number of levels
1
Color
green-yellow
Flammability rating according to UL 94
V0
Rated surge voltage
8 kV
Back of the hand protection
guaranteed
ETIM 2.0
EC000901
UNSPSC 6.01
30211811