3036149 Phoenix Contact Terminal Blocks

3036149 Product Details

• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Static insulating material application in cold
  -60 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Length
  80 mm
• ECLASS 9.0
  27141120
• Conductor cross section flexible, with ferrule with plastic sleeve max.
  16 mm²
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• Permissible humidity (storage/transport)
  30 % ... 70 %
• ECLASS 11.0
  27141120
• Potentials
  1
• Rated surge voltage
  8 kV
• Insulating material group
  I
• Maximum power dissipation for nominal condition
  2.43 W
• Power frequency withstand voltage setpoint
  2.2 kV
• Bending test turns
  135
• Bending test conductor cross section/weight
  0.2 mm² / 0.2 kg
• Tight fit on carrier
  NS 35
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Ageing test for screwless modular terminal block temperature cycles
  192
• Surface flammability NFPA 130 (ASTM E 162)
  passed
End cover width
2.2 mm
Connection in acc. with standard
CSA
Conductor cross section AWG min.
24
Conductor cross section flexible max.
16 mm²
Max. AWG conductor cross section, flexible
6
Internal cylindrical gage
A7
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.0
27141100
ETIM 2.0
EC000897
UNSPSC 11
39121410
UNSPSC 13.2
39121410
Number of levels
1
Nominal cross section
16 mm²
Overvoltage category
III
Open side panel
Yes
Result of surge voltage test
Test passed
Result of power-frequency withstand voltage test
Test passed
Result of tight fit on support
Test passed
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
16 mm²
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection
1 level
Stripping length
18 mm
Conductor cross section solid max.
25 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
16 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
4 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ETIM 6.0
EC000897
ETIM 3.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
Color
gray
Degree of pollution
3
Tensile test result
Test passed
Setpoint
5 N
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of thermal test
Test passed
Result of aging test
Test passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Width
12.2 mm
Height NS 35/15
59 mm
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 10.0.1
27141120
ECLASS 5.0
27141100
ECLASS 6.0
27141100
ETIM 4.0
EC000897
UNSPSC 18.0
39121410
Number of connections
2
Insulating material
PA
Maximum load current
90 A (with 25 mm² conductor cross section)
Nominal current IN
76 A
Back of the hand protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of flexion and pull-out test
Test passed
Result of temperature-rise test
Test passed
Short circuit stability result
Test passed
Short-time current
1.92 kA
Connection method
Spring-cage connection
Conductor cross section AWG max.
4
Min. AWG conductor cross section, flexible
24
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
1.5 mm²
ECLASS 5.1
27141100
ECLASS 7.0
27141120
UNSPSC 6.01
30211811
UNSPSC 21.0
39121410
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Height NS 35/7,5
51.5 mm
ETIM 7.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
Flammability rating according to UL 94
V0
Bending test rotation speed
10 rpm
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Nominal voltage UN
1000 V

Product condition