3036479 Phoenix Contact Terminal Blocks

Product Details

• UNSPSC 11
  39121410
• UNSPSC 21.0
  39121410
• Insulating material
  PA
• Insulating material group
  I
• Back of the hand protection
  guaranteed
• Result of surge voltage test
  Test passed
• Number of connections
  3
• Area of application
  Railway industry
• Nominal current IN
  41 A (with 10 mm² conductor cross section)
• Power frequency withstand voltage setpoint
  2.2 kV
• Result of flexion and pull-out test
  Test passed
• Result of temperature-rise test
  Test passed
• Short circuit stability result
  Test passed
• Oscillation, broadband noise test result
  Test passed
• Acceleration
  30g
• Shock test result
  Test passed
• Shock duration
  18 ms
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Height NS 35/15
  51 mm
Connection method
Spring-cage connection
Conductor cross section AWG min.
24
Min. AWG conductor cross section, flexible
24
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
ECLASS 5.0
27141100
Nominal cross section
6 mm²
Flammability rating according to UL 94
V0
Overvoltage category
III
Open side panel
Yes
Bending test rotation speed
10 rpm
Tensile test result
Test passed
Conductor cross section short circuit testing
10 mm²
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of aging test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
ASD level
11.83 (m/s2)2/Hz
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/7,5
43.5 mm
Connection in acc. with standard
CSA
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Potentials
1
Rated surge voltage
8 kV
Maximum power dissipation for nominal condition
1.31 W
Nominal voltage UN
1000 V
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
Setpoint
5 N
Result of voltage-drop test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock form
Half-sine
Static insulating material application in cold
-60 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
90.5 mm
Number of levels
1
Color
blue
Degree of pollution
3
Finger protection
guaranteed
Tight fit on carrier
NS 35
Maximum load current
52 A (in case of a 10 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.)
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Short-time current
1.2 kA
End cover width
2.2 mm
Conductor cross section AWG max.
8
Max. AWG conductor cross section, flexible
10
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.1
27141100
ETIM 7.0
EC000897
ETIM 2.0
EC000897
UNSPSC 12.01
39121410
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Ageing test for screwless modular terminal block temperature cycles
192
Test directions
X-, Y- and Z-axis (pos. and neg.)
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Conductor cross section solid max.
10 mm²
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Stripping length
12 mm
Conductor cross section flexible min.
0.2 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 7.0
27141120
ETIM 3.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
Result of tight fit on support
Test passed
Result of thermal test
Test passed
Test duration per axis
5 h
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Connection
1 level
Conductor cross section solid min.
0.2 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 5.1
27141100
ECLASS 4.0
27141100
ETIM 6.0
EC000897
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Width
8.2 mm
Conductor cross section flexible max.
6 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Internal cylindrical gage
A5
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
ECLASS 9.0
27141120
UNSPSC 20.0
39121410
UNSPSC 13.2
39121410
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ECLASS 6.0
27141100
ETIM 4.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410