3036466 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  3
• Nominal cross section
  6 mm²
• Area of application
  Railway industry
• Rated surge voltage
  8 kV
• Nominal voltage UN
  1000 V
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Finger protection
  guaranteed
• Bending test turns
  135
• Tensile test result
  Test passed
• Result of temperature-rise test
  Test passed
• Result of thermal test
  Test passed
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Test spectrum
  Service life test category 2, bogie-mounted
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Potentials
  1
• Insulating material
  PA
• Overvoltage category
  III
• Insulating material group
  I
• Nominal current IN
  41 A (with 10 mm² conductor cross section)
• Back of the hand protection
  guaranteed
Result of power-frequency withstand voltage test
Test passed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Setpoint
5 N
Result of voltage-drop test
Test passed
Short circuit stability result
Test passed
Result of aging test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Shock test result
Test passed
Shock duration
18 ms
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Power frequency withstand voltage setpoint
2.2 kV
Result of surge voltage test
Test passed
Bending test rotation speed
10 rpm
Result of tight fit on support
Test passed
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Short-time current
1.2 kA
Oscillation, broadband noise test result
Test passed
ASD level
11.83 (m/s2)2/Hz
Shock form
Half-sine
Number of levels
1
Color
gray
Flammability rating according to UL 94
V0
Maximum power dissipation for nominal condition
1.31 W
Degree of pollution
3
Maximum load current
52 A (in case of a 10 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.)
Open side panel
Yes
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of flexion and pull-out test
Test passed
Tight fit on carrier
NS 35
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Proof of thermal characteristics (needle flame) effective duration
30 s
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Acceleration
30g
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Conductor cross section short circuit testing
10 mm²
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Test duration per axis
5 h
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Width
8.2 mm
Stripping length
12 mm
Conductor cross section flexible max.
6 mm²
Min. AWG conductor cross section, flexible
24
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Internal cylindrical gage
A5
ECLASS 11.0
27141120
ECLASS 5.0
27141100
Static insulating material application in cold
-60 °C
Length
90.5 mm
Connection method
Spring-cage connection
Conductor cross section solid max.
10 mm²
Conductor cross section AWG max.
8
ECLASS 5.1
27141100
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Connection in acc. with standard
CSA
Conductor cross section flexible min.
0.2 mm²
Max. AWG conductor cross section, flexible
10
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.1
27141100
ETIM 6.0
EC000897
UNSPSC 13.2
39121410
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 7.0
27141120
Height NS 35/15
51 mm
ETIM 4.0
EC000897
UNSPSC 18.0
39121410
UNSPSC 11
39121410
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 35/7,5
43.5 mm
Connection
1 level
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 6.0
27141100
ECLASS 9.0
27141120
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
End cover width
2.2 mm
Conductor cross section AWG min.
24
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
ETIM 3.0
EC000897
ETIM 7.0
EC000897
ETIM 2.0
EC000897
UNSPSC 7.0901
39121410
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
UNSPSC 21.0
39121410
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Permissible humidity (storage/transport)
30 % ... 70 %
UNSPSC 19.0
39121410
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
ECLASS 10.0.1
27141120
UNSPSC 20.0
39121410