3036327 Phoenix Contact Terminal Blocks

Product Details

• Shock test result
  Test passed
• Number of connections
  4
• Flammability rating according to UL 94
  V0
• Connection in acc. with standard
  CSA
• Open side panel
  Yes
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Surge voltage test setpoint
  7.3 kV
• Tractive force setpoint
  60 N
• Conductor cross section short circuit testing
  2.5 mm²
• Result of thermal test
  Test passed
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Shock form
  Half-sine
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Width
  5.2 mm
• Height NS 35/7,5
  47.5 mm
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  2.5 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  0.14 mm²
• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
• Rated surge voltage
  6 kV
Insulating material group
I
Back of the hand protection
guaranteed
Bending test conductor cross section/weight
0.08 mm² / 0.1 kg
Result of voltage-drop test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
ASD level
6.12 (m/s2)2/Hz
Number of levels
2
Color
gray
Degree of pollution
3
Nominal voltage UN
500 V
Result of surge voltage test
Test passed
Checking the mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Conductor cross section tensile test
4 mm²
Result of aging test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
18 ms
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
End cover width
2.2 mm
Conductor cross section solid max.
4 mm²
Conductor cross section AWG max.
12
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.0
27141100
ECLASS 7.0
27141141
ETIM 7.0
EC000901
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
Nominal cross section
2.5 mm²
Maximum power dissipation for nominal condition
0.77 W (the value is multiplied when connecting multiple levels)
Maximum load current
32 A (with 4 mm² conductor cross section)
Result of power-frequency withstand voltage test
Test passed
Result of temperature-rise test
Test passed
Short-time current
0.3 kA
Proof of thermal characteristics (needle flame) effective duration
30 s
Test spectrum
Service life test category 2, bogie-mounted
Test duration per axis
5 h
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/15
55 mm
Connection method
Spring-cage connection
Conductor cross section flexible max.
2.5 mm²
Conductor cross section AWG min.
28
Insulating material
PA
Overvoltage category
III
Nominal current IN
22 A
Finger protection
guaranteed
Power frequency withstand voltage setpoint
1.89 kV
Result of flexion and pull-out test
Test passed
Short circuit stability result
Test passed
Oscillation, broadband noise test result
Test passed
Acceleration
30g
Relative insulation material temperature index (Elec.; UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Note
Please observe the current carrying capacity of the DIN rails.
Conductor cross section flexible min.
0.08 mm²
Stripping length
10 mm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 10.0.1
27141141
ECLASS 9.0
27141141
ETIM 3.0
EC000901
UNSPSC 6.01
30211811
UNSPSC 11
39121410
UNSPSC 19.0
39121410
Number of shocks per direction
3
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Length
67.5 mm
Conductor cross section solid min.
0.08 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Internal cylindrical gage
A3
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 11.0
27141141
ECLASS 4.1
27141100
ETIM 2.0
EC000901
ETIM 4.0
EC000901
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 6.0
27141100
ECLASS 5.1
27141100
ETIM 6.0
EC000901
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410