3031636 Phoenix Contact Terminal Blocks

Product Details

• ECLASS 6.0
  27141100
• Nominal cross section
  2.5 mm²
• Insulating material group
  I
• Overvoltage category
  III
• Nominal current IN
  22 A (with a 2.5 mm² conductor cross section)
• Power frequency withstand voltage setpoint
  2 kV
• Bending test turns
  135
• Result of temperature-rise test
  Test passed
• Short-time current
  0.48 kA
• Test spectrum
  Service life test category 2, bogie-mounted
• Shock test result
  Test passed
• Shock duration
  18 ms
• ECLASS 4.0
  27141100
• ECLASS 5.1
  27141100
• Number of levels
  1
• Color
  gray
• Rated surge voltage
  8 kV
• Maximum load current
  28 A (with 4 mm² conductor cross section)
• Result of surge voltage test
  Test passed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
Bending test conductor cross section/weight
0.08 mm² / 0.1 kg
Short circuit stability result
Test passed
Result of aging test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Number of connections
4
Insulating material
PA
Degree of pollution
3
Nominal voltage UN
800 V
Back of the hand protection
guaranteed
Result of flexion and pull-out test
Test passed
Result of tight fit on support
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of thermal test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Test duration per axis
5 h
Shock form
Half-sine
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/15
44 mm
Connection
1 level
Conductor cross section solid max.
4 mm²
Conductor cross section flexible min.
0.08 mm²
Min. AWG conductor cross section, flexible
28
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
Internal cylindrical gage
A3
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141120
Potentials
1
Maximum power dissipation for nominal condition
0.77 W
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Bending test rotation speed
10 rpm
Tensile test result
Test passed
Tight fit on carrier
NS 35
Conductor cross section short circuit testing
4 mm²
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
ASD level
6.12 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
End cover width
2.2 mm
Length
72 mm
Connection method
Spring-cage connection
Conductor cross section AWG min.
28
Conductor cross section flexible max.
2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ETIM 2.0
EC000897
ETIM 6.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410
Flammability rating according to UL 94
V0
Open side panel
Yes
Finger protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Setpoint
1 N
Result of voltage-drop test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Oscillation, broadband noise test result
Test passed
Acceleration
30g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Static insulating material application in cold
-60 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Width
5.2 mm
Height NS 35/7,5
36.5 mm
Stripping length
8 mm ... 10 mm
Connection in acc. with standard
CSA
Conductor cross section solid min.
0.08 mm²
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ECLASS 5.0
27141100
ETIM 7.0
EC000897
UNSPSC 19.0
39121410
ECLASS 7.0
27141120
ECLASS 9.0
27141120
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
ETIM 3.0
EC000897
ETIM 4.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
UNSPSC 11
39121410
UNSPSC 18.0
39121410