3011038 Phoenix Contact Terminal Blocks
Part#:3011038
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 144
May 2, 2024
About the product: Motor terminal block, four-level, bridgeable, with PE foot, cross section: 0.2 mm² - 4 mm², AWG: 24 - 12, connection method: screw connection, width: 6.2 mm, color: gray, mounting type: NS 35/7,5, NS 35/15
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 3011038 Phoenix Contact price in the box on the right side or send a quick quote.
3011038 Product Details
- Setpoint 1 N
- Nominal cross section 2.5 mm²
- Insulating material PA
- Overvoltage category III
- Surge voltage test setpoint 7.3 kV
- Color gray
- Nominal current IN 19 A
- Degree of pollution 3
- Result of surge voltage test Test passed
- Bending test rotation speed 10 rpm
- Conductor cross section tensile test 4 mm²
- Tight fit on carrier NS 35
- Result of temperature-rise test Test passed
- Number of connections 7
- Insulating material group I
- Maximum load current 24 A (with 4 mm² conductor cross section)
- Bending test turns 135
- Number of levels 4
- Width 6.2 mm
- Open side panel No
- Power frequency withstand voltage setpoint 1.89 kV
- Tractive force setpoint 60 N
- Short-time current 0.48 kA
- Relative insulation material temperature index (Elec.; UL 746 B) 130 °C
- Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg
- Surface flammability NFPA 130 (ASTM E 162) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
- Height NS 35/7,5 70 mm
- Conductor cross section flexible max. 2.5 mm²
- Conductor cross section AWG min. 24
- Cross section with insertion bridge, solid max. 4 mm²
- Tightening torque, min 0.5 Nm
- Ambient temperature (assembly) -5 °C ... 70 °C
- ECLASS 11.0 27141141
- ECLASS 4.0 27141100
- ETIM 2.0 EC001329
- ETIM 4.0 EC001329
- UNSPSC 7.0901 39121410
- UNSPSC 19.0 39121410
- Result of flexion and pull-out test Test passed
- Result of tight fit on support Test passed
- Conductor cross section short circuit testing 4 mm²
- Short circuit stability result Test passed
- Specific optical density of smoke NFPA 130 (ASTM E 662) passed
- Smoke gas toxicity NFPA 130 (SMP 800C) passed
- Length 83.5 mm
- Connection method Screw connection
- Conductor cross section flexible min. 0.2 mm²
- Conductor cross section AWG max. 12
- Conductor cross section flexible, with ferrule with plastic sleeve min. 0.25 mm²
- Internal cylindrical gage A3
- Permissible humidity (storage/transport) 30 % ... 70 %
- Ambient temperature (actuation) -5 °C ... 70 °C
- ECLASS 5.0 27141100
- ECLASS 6.0 27141100
- ETIM 6.0 EC000901
- UNSPSC 6.01 30211811
- UNSPSC 20.0 39121410
- Flammability rating according to UL 94 V0
- Rated surge voltage 6 kV
- Connection in acc. with standard CSA
- Checking the mechanical stability of terminal points (5 x conductor connection) Test passed
- Tensile test result Test passed
- Requirements, voltage drop ≤ 3.2 mV
- Proof of thermal characteristics (needle flame) effective duration 30 s
- Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
- Height NS 35/15 77.5 mm
- Conductor cross section solid max. 4 mm²
- Conductor cross section flexible, with ferrule without plastic sleeve max. 2.5 mm²
- Cross section with insertion bridge, stranded max. 2.5 mm²
- Stripping length 8 mm
- Screw thread M3
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 10.0.1 27141141
- ECLASS 7.0 27141141
- ECLASS 9.0 27141141
- UNSPSC 13.2 39121410
- UNSPSC 12.01 39121410
- UNSPSC 21.0 39121410
- Nominal voltage UN 400 V (when using EB insertion bridges, the nominal voltage is reduced to 250 V.)
- Result of power-frequency withstand voltage test Test passed
- Bending test conductor cross section/weight 0.2 mm² / 0.2 kg
- Result of voltage-drop test Test passed
- Result of thermal test Test passed
- Static insulating material application in cold -60 °C
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
- Note Please observe the current carrying capacity of the DIN rails.
- Conductor cross section solid min. 0.2 mm²
- Conductor cross section flexible, with ferrule without plastic sleeve min. 0.25 mm²
- Conductor cross section flexible, with ferrule with plastic sleeve max. 2.5 mm²
- Tightening torque max 0.6 Nm
- Operating temperature -60 °C ... 105 °C (max. short-term operating temperature 125°C)
- Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
- ECLASS 4.1 27141100
- ECLASS 5.1 27141100
- ETIM 3.0 EC001329
- ETIM 7.0 EC000901
- UNSPSC 11 39121410
- UNSPSC 18.0 39121410
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
This item can ship within 24h!
1-year warranty
$18.33
3011038
Stock:
144
Select Qty:
$18.33
$18.33 each
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
