3007929 Phoenix Contact Terminal Blocks

Product Details

• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Bending test turns
  135
• ASD level
  1.857 (m/s2)2/Hz
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Number of levels
  1
• Flammability rating according to UL 94
  V2
• Maximum power dissipation for nominal condition
  1.02 W
• Degree of pollution
  3
• Fuse
  G / 5 x 20 / 5 x 25 / 5 x 30
• Number of positions
  1
• Surge voltage test setpoint
  9.8 kV
• Actuatiing forces on plug in or lever in fuse insert carriers
  Test passed
• Contact resistance
  Test passed
• Testing the rated value of the power dissipation (exclusively short circuit protection)
  Test passed
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Acceleration
  5g
• Shock form
  Half-sine
Static insulating material application in cold
-60 °C
Width
8.2 mm
Conductor cross section solid min.
0.2 mm²
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Screw thread
M3
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 4.0
27141100
ETIM 3.0
EC000899
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
Nominal cross section
4 mm²
Rated surge voltage
8 kV
Nominal current IN
6.3 A
Insulating material group
I
Finger protection
guaranteed
Open side panel
No
Compatibitity between modular fuse terminal block and fuse insert
Test passed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Result of thermal test
Test passed
Test spectrum
Service life test category 1, class B, body mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/15
64 mm
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Cross section with insertion bridge, stranded max.
4 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Connection method
Screw connection
Tightening torque max
0.8 Nm
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 7.0
27141116
ETIM 7.0
EC000899
UNSPSC 13.2
39121410
Number of connections
2
Insulating material
PA
Rated operating voltage
250 V
Connection in acc. with standard
CSA
Fuse type
Glass / ceramics / ...
Back of the hand protection
guaranteed
Result of surge voltage test
Test passed
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Result of temperature-rise test
Test passed
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Shock test result
Test passed
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Length
72.5 mm
Conductor cross section flexible min.
0.2 mm²
Cross section with insertion bridge, solid max.
4 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Note
Swing the locking lever to its final position before replacing the fuse.
Color
blue
Overvoltage category
III
Nominal voltage UN
800 V (As a fuse terminal block)
Maximum load current
6.3 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of tight fit on support
Test passed
Power frequency withstand voltage setpoint
2 kV
Result of flexion and pull-out test
Test passed
Testing the rated value of the power dissipation (overload and short circuit Protection)
Test passed
Oscillation, broadband noise test result
Test passed
Test duration per axis
5 h
Shock duration
30 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 32
61.5 mm
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
2 conductors with same cross section, solid min.
0.2 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
Stripping length
8 mm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.1
27141100
ECLASS 6.0
27141100
UNSPSC 11
39121410
UNSPSC 6.01
30211811
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Tightening torque, min
0.6 Nm
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 11.0
27141116
ECLASS 5.1
27141100
ECLASS 9.0
27141116
ETIM 6.0
EC000899
UNSPSC 18.0
39121410
UNSPSC 21.0
39121410
ECLASS 10.0.1
27141116
ECLASS 5.0
27141100
ETIM 4.0
EC000899
ETIM 2.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
2 conductors with same cross section, solid max.
1.5 mm²
Height NS 35/7,5
56.5 mm
Conductor cross section solid max.
4 mm²
Internal cylindrical gage
A4
Permissible humidity (storage/transport)
30 % ... 70 %