3001381 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  2
• Color
  gray
• Overvoltage category
  III
• Open side panel
  No
• Result of surge voltage test
  Test passed
• Bending test rotation speed
  10 rpm
• Result of tight fit on support
  Test passed
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Result of thermal test
  Test passed
• Static insulating material application in cold
  -60 °C
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Height NS 35/7,5
  47 mm
• Stripping length
  7 mm
• Connection in acc. with standard
  CSA
• Conductor cross section flexible max.
  4 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  0.25 mm²
• 2 conductors with same cross section, solid min.
  0.2 mm²
• Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
  1.5 mm²
• China RoHS
  Environmentally Friendly Use Period = 50 years
ECLASS 7.0
27141120
ETIM 6.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
Potentials
1
Rated surge voltage
8 kV
Nominal voltage UN
800 V
Shock protection test specification
IEC 60529:2001-02
Back of the hand protection
guaranteed
Result of flexion and pull-out test
Test passed
Tight fit on carrier
NS 32/NS 35
Short circuit stability result
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 32
52 mm
Screw thread
M3
Conductor cross section solid max.
6 mm²
Conductor cross section flexible min.
0.2 mm²
Min. AWG conductor cross section, flexible
20
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.0
27141100
ECLASS 9.0
27141120
ETIM 7.0
EC000897
UNSPSC 19.0
39121410
Nominal cross section
10 mm²
Degree of pollution
3
Insulating material group
I
Nominal current IN
32 A (with 6 mm² conductor cross section)
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
Tensile test result
Test passed
Setpoint
5 N
Proof of thermal characteristics (needle flame) effective duration
30 s
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/15
54.5 mm
Connection method
Screw connection
Tightening torque max
0.8 Nm
Conductor cross section AWG max.
10
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
2 conductors with same cross section, solid max.
1.5 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.0
27141100
ETIM 4.0
EC000897
UNSPSC 6.01
30211811
Insulating material
PA
Maximum power dissipation for nominal condition
1.82 W (the value is multiplied when connecting multiple levels)
Finger protection
guaranteed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
4 mm²
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Width
10.2 mm
Connection
1st level connection right
Conductor cross section solid min.
0.2 mm²
Max. AWG conductor cross section, flexible
8
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
REACh SVHC
Lead 7439-92-1
ECLASS 11.0
27141120
ECLASS 5.1
27141100
ETIM 2.0
EC000897
ETIM 3.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 18.0
39121410
UNSPSC 21.0
39121410
Number of connections
3
Flammability rating according to UL 94
V0
Maximum load current
41 A (In the case of a 6 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors)
Power frequency withstand voltage setpoint
2 kV
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of temperature-rise test
Test passed
Short-time current
0.48 kA
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Length
53 mm
Note
Feed-through
Tightening torque, min
0.6 Nm
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
ECLASS 4.1
27141100
ECLASS 6.0
27141100
UNSPSC 7.0901
39121410
UNSPSC 11
39121410