3001501 Phoenix Contact Terminal Blocks
Part#:3001501
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 21200
Nov 22, 2024
Feed-through terminal block, nom. voltage: 800 V, nominal current: 24 A, connection method: Screw connection, number of connections: 2, cross section: 0.2 mm² - 4 mm², AWG: 24 - 12, width: 5.2 mm, color: gray, mounting type: NS 32, NS 35/15, NS 35/7,5
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 3001501 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- ECLASS 5.0 27141100
- Conductor cross section AWG min. 24
- Cross section with insertion bridge, stranded max. 2.5 mm²
- ECLASS 7.0 27141120
- Conductor cross section flexible, with ferrule without plastic sleeve min. 0.25 mm²
- Permissible humidity (storage/transport) 30 % ... 70 %
- Cross section with insertion bridge, solid max. 4 mm²
- ECLASS 4.0 27141100
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum 0.5 mm²
- Overvoltage category III
- Result of power-frequency withstand voltage test Test passed
- Tensile test result Test passed
- Short circuit stability result Test passed
- Test directions X-, Y- and Z-axis (pos. and neg.)
- Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03
- Height NS 35/7,5 47 mm
- Maximum power dissipation for nominal condition 0.77 W
- Result of flexion and pull-out test Test passed
- Bending test turns 135
- Tight fit on carrier NS 32/NS 35
- Nominal current IN 24 A
- Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2018-05
- ASD level 6.12 (m/s2)2/Hz
- Shock duration 18 ms
- Tightening torque max 0.8 Nm
- Conductor cross section solid max. 4 mm²
- Nominal voltage UN 800 V
- Surge voltage test setpoint 9.6 kV
- Setpoint 1 N
- Result of voltage-drop test Test passed
- Test spectrum Service life test category 2, bogie-mounted
- Proof of thermal characteristics (needle flame) effective duration 30 s
- End cover width 1.8 mm
- Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11
- Back of the hand protection guaranteed
- Bending test rotation speed 10 rpm
- Result of temperature-rise test Test passed
- Result of thermal test Test passed
- Acceleration 30g
- Width 5.2 mm
- Height NS 35/15 54.5 mm
- Screw thread M3
- Conductor cross section flexible max. 2.5 mm²
- Conductor cross section AWG max. 12
- Open side panel Yes
- Result of surge voltage test Test passed
- Result of tight fit on support Test passed
- Test frequency f1 = 5 Hz to f2 = 250 Hz
- Test duration per axis 5 h
- Shock test result Test passed
- Length 42.5 mm
- Tightening torque, min 0.6 Nm
- Min. AWG conductor cross section, flexible 24
- 2 conductors with same cross section, stranded max. 1.5 mm²
- Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
- ECLASS 10.0.1 27141120
- Color gray
- Number of shocks per direction 3
- UNSPSC 7.0901 39121410
- Number of levels 1
- Degree of pollution 3
- Requirements, voltage drop U1 ≤ 3,2 mVU2 ≤ 1,5 x U1dT ≤ 45 K
- Shock form Half-sine
- 2 conductors with same cross section, solid min. 0.2 mm²
- ETIM 3.0 EC000897
- UNSPSC 6.01 30211811
- UNSPSC 13.2 39121410
- UNSPSC 18.0 39121410
- Potentials 1
- Flammability rating according to UL 94 V0
- UNSPSC 20.0 39121410
- Power frequency withstand voltage setpoint 2 kV
- Number of connections 2
- UNSPSC 11 39121410
- UNSPSC 21.0 39121410
- Insulating material PA
- Insulating material group I
- Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed
- Requirement temperature-rise test Increase in temperature ≤ 45 K
- Conductor cross section flexible, with ferrule without plastic sleeve max. 2.5 mm²
- UNSPSC 19.0 39121410
- Nominal cross section 2.5 mm²
- Rated surge voltage 8 kV
- Maximum load current 32 A (with 4 mm² conductor cross section)
- Finger protection guaranteed
- Conductor cross section solid min. 0.2 mm²
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum 1 mm²
- Max. AWG conductor cross section, flexible 14
- Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum 1.5 mm²
- Ambient temperature (actuation) -5 °C ... 70 °C
- ECLASS 11.0 27141120
- ECLASS 5.1 27141100
- ETIM 7.0 EC000897
- Connection method Screw connection
- Conductor cross section flexible, with ferrule with plastic sleeve max. 1.5 mm²
- Ambient temperature (assembly) -5 °C ... 70 °C
- ETIM 2.0 EC000897
- ECLASS 4.1 27141100
- Height NS 32 52 mm
- Connection in acc. with standard CSA
- Conductor cross section flexible, with ferrule with plastic sleeve min. 0.25 mm²
- 2 conductors with same cross section, solid max. 1.5 mm²
- Operating temperature -60 °C ... 105 °C (max. short-term operating temperature 130°C)
- Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum 0.25 mm²
- REACh SVHC Lead 7439-92-1
- ECLASS 6.0 27141100
- UNSPSC 12.01 39121410
- Stripping length 8 mm
- Conductor cross section flexible min. 0.2 mm²
- 2 conductors with same cross section, stranded min. 0.2 mm²
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 9.0 27141120
- ETIM 4.0 EC000897
- ETIM 6.0 EC000897
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
This item can ship within 24h!
1-year warranty
$3.40
Stock:
21,200
Select Qty:
$3.40
$3.40 each
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨