2989200 Phoenix Contact Data & Networking Devices
Part#:2989200
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
About the product: Ethernet Gigabit Modular Switch with eight 10/100/1000 Mbps RJ45 ports and four 1000 Mbps SFP ports, can be extended by an extension station to up to 28 ports
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Data & Networking Devices that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2989200 Phoenix Contact price in the box on the right side or send a quick quote.
2989200 Product Details
- Supply voltage range 18.5 V DC ... 30.2 V DC
- No. of ports 2 (Per interface module)
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Ambient temperature (operation) -20 °C ... 55 °C (non-condensing)
- Ambient temperature (storage/transport) -20 °C ... 70 °C
- Transmission physics multi-mode fiberglass
- PROFINET conformance class Conformance-Class B
- Test result 1 m
- Vibration (storage/transport) 5g, 150 Hz, in acc. with IEC 60068-2-6
- Free from substances that could impair the application of coating In acc. with VW specification
- ECLASS 5.0 19030100
- ETIM 3.0 EC000734
- Maximum conductor length (twisted pair) 100 m
- UNSPSC 18.0 43222612
- UNSPSC 20.0 43222612
- Conductor cross section AWG max. 12
- Conductor cross section AWG min. 24
- Height 127 mm
- Air pressure (storage/transport) 66 kPa ... 108 kPa (3500 m above sea level)
- Transmission speed 10/100 Mbps (full duplex)
- Management Web-based management (HTTP)
- Diagnostic functions RMON History
- Cascading depth Network, linear, and star structure: any
- Vibration (operation) in acc. with IEC 60068-2-6: 5g, 150 Hz
- REACh SVHC 1,2-dimethoxyethane,ethylene glycol dimethyl ether (EGDME) 110-71-4
- ECLASS 6.0 19170100
- ETIM 7.0 EC000734
- ETIM 4.0 EC000734
- Supply voltage 24 V DC (redundant)
- Mounting type DIN rail
- UNSPSC 19.0 43222612
- Interface Ethernet
- Connection method Screw connection
- Additional functions DHCP Option 82 (Relay Agent)
- Type of test Free fall in acc. with IEC 60068-2-32
- Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 10.0.1 19170401
- Degree of protection IP20
- Air pressure (operation) 80 kPa ... 108 kPa (2000 m above sea level)
- ECLASS 7.0 19170106
- ETIM 6.0 EC000734
- UNSPSC 11 43172015
- UNSPSC 7.0901 43201404
- UNSPSC 13.2 43222612
- Redundancy MRP (Media Redundancy Protocol)
- Supported browsers Internet Explorer 5.5 or higher
- Noise emission EN 61000-6-3/-4
- Width 289 mm
- ECLASS 4.1 24010500
- ECLASS 11.0 19170401
- UNSPSC 12.01 43201410
- Permissible humidity (storage/transport) 10 % ... 95 % (non-condensing)
- Basic functions Store-and-forward switch complies with IEEE 802.3, 8 priority classes according to IEEE 802.1p, smart mode, port mirroring, multicast filtering, IGMP snooping, VLANs, Media Redundancy Protocol (MRP according to IEC 62439), Rapid Spanning Tree (RSTP), Fast
- ECLASS 9.0 19170106
- UNSPSC 6.01 43172015
- Depth 122 mm
- Permissible humidity (operation) 10 % ... 95 % (non-condensing)
- Stripping length 7 mm
- Noise immunity EN 61000-6-2:2005
- UNSPSC 21.0 43222612
- ECLASS 5.1 19030100
- ECLASS 4.0 24010500
- Note on the connection method Max. 4 interface modules (without extension)
- Filter functions Quality of Service (8 priority classes)
- PROFINET device function PROFINET device
- Signal contact control current 190 mA (maximum)
- Type AX Stand-alone
- Max. current consumption 2.7 A
- Conductor cross section flexible max. 2.5 mm²
- PROFINET specification Version 1.1
- Typical current consumption 800 mA (up to 2.7 A, depends on the configuration)
- Net weight 2700 g
- Conductor cross section flexible min. 0.2 mm²
- Signal contact control voltage 24 V (typical)
- Material base plate Die-cast aluminum, corrosion-resistant
- Status and diagnostic indicators LEDs: US1, US2 (power supply), Fail (alarm contact), 2 LEDs per Ethernet port (Link and switchable Activity/Speed/Duplex), DI1, DI2 (Digital Input), UI (supply voltage for ext. sensor), and large operator display (display of IP address and other parameter
- Residual ripple 3.6 VPP (within the permitted voltage range)
- Conductor cross section solid min. 0.2 mm²
- Conductor cross section solid max. 2.5 mm²
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
2989200
Select Qty:
Average response time: 11 minutes
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨