2981842 Phoenix Contact Electrical Safety Devices

2981842 Product Details

• Ambient temperature (operation)
  -20 °C ... 55 °C
• Maximum altitude
  max. 2000 m (Above sea level)
• Inrush current
  typ. 350 mA DC (Δt < 1 µs at Us)
• Typical release time
  typ. 15 ms (when controlled via A1)
• Limiting continuous current
  6 A (N/O contact)
• Interrupting rating (ohmic load) max.
  For additional values, see load curve
• Nominal operating mode
  100% operating factor
• Min. degree of protection of inst. location
  IP54
• Connection method
  Push-in connection
• Conductor cross-section flexible with ferrule without plastic sleeve
  0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
• Conductor cross-section flexible with ferrule and plastic sleeve
  0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
• Standards/regulations
  DIN EN 50178
• Height
  114.5 mm
• Recovery time
  < 500 ms
• Contact material
  AgSnO2
• Minimum switching voltage
  5 V AC/DC
• Inrush current, minimum
  10 mA
• Switching capacity according to IEC 60947-5-1
  5 A (24 V (DC13))
• Relay type
  Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
• Mounting position
  vertical or horizontal
Conductor cross section flexible
0.2 mm² ... 1.5 mm²
Designation
Air clearances and creepage distances between the power circuits
Safety Integrity Level Claim Limit (SIL CL)
1
Overvoltage category
III
ECLASS 10.0.1
27371601
Width
22.5 mm
Ambient temperature (storage/transport)
-40 °C ... 70 °C
Max. permissible relative humidity (operation)
75 % (on average, 85% infrequently, non-condensing)
Rated control supply current IS
typ. 45 mA
Typ. starting time with Us
typ. 15 ms (when controlled via A1)
Maximum switching frequency
0.5 Hz
Maximum inrush current
8 A
Maximum interrupting rating (inductive load)
48 W (N/O contact, 24 V DC, τ = 40 ms)
Output fuse
10 A gL/gG (N/O contact)
Mounting type
DIN rail mounting
Housing color
yellow
Conductor cross section solid
0.2 mm² ... 1.5 mm²
Stop category
0
Category
1
Degree of pollution
2
Shock
15g (In the event of stress caused by shock, contact reactions are possible for up to 2 ms.)
ECLASS 4.1
27371100
ECLASS 5.0
27371600
ECLASS 7.0
27371601
ETIM 2.0
EC001449
UNSPSC 6.01
30211901
UNSPSC 13.2
39121501
UNSPSC 19.0
39122334
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Max. permissible humidity (storage/transport)
75 % (on average, 85% infrequently, non-condensing)
Input voltage range
20.4 V AC/DC ... 26.4 V AC/DC
Protective circuit
Surge protection Suppressor diode
Sq. Total current
48 A2
Mechanical service life
10x 106 cycles
Net weight
153 g
Housing material
PBT
Stripping length
8 mm
Safety Integrity Level (SIL)
1
Performance level (PL)
c
Rated insulation voltage
250 V
REACh SVHC
Lead 7439-92-1
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.1
27371600
ETIM 4.0
EC001449
ETIM 6.0
EC001437
UNSPSC 7.0901
39121501
UNSPSC 18.0
39122334
UNSPSC 21.0
39122334
Depth
112 mm
Rated control circuit supply voltage US
24 V AC/DC -15 % / +10 %
Power consumption at US
typ. 1.08 W
Operating voltage display
1 x green LED
Contact type
3 enabling current paths
Maximum switching voltage
230 V AC/DC (Observe the load curve)
Switching capacity
min. 50 mW
Degree of protection
IP20
pluggable
Yes
Conductor cross-section AWG
24 ... 16
Torque
0.6 Nm
Rated surge voltage/insulation
4 kV / Basic isolation, (safe isolation, reinforced insulation and 6 kV between input circuit and enabling current paths.)
Conformance
CE-compliant
ECLASS 4.0
27371100
ECLASS 9.0
27371601
ETIM 7.0
EC001437
UNSPSC 11
39121501
Vibration (operation)
10 Hz ... 150 Hz, 2g (In the event of stress caused by vibration, contact reactions are possible for up to 1 ms.)
ECLASS 11.0
27371819
ECLASS 6.0
27371600
ETIM 3.0
EC001449
UNSPSC 12.01
39121501
UNSPSC 20.0
39122334

Product condition