2981952 Phoenix Contact Electrical Safety Devices

2981952 Product Details

• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Typ. starting time with Us
  typ. 20 ms (when controlled via A1)
• Maximum switching frequency
  0.5 Hz
• Limiting continuous current
  6 A (N/O contact)
• Maximum interrupting rating (inductive load)
  42 W (N/O contact, 24 V DC, τ = 40 ms)
• Switching capacity (360/h cycles)
  4 A (24 V (DC13))
• Net weight
  142 g
• Degree of protection
  IP20
• Conductor cross section solid
  0.2 mm² ... 2.5 mm²
• Stripping length
  7 mm
• Safety Integrity Level Claim Limit (SIL CL)
  1
• Rated control supply current IS
  typ. 47 mA
• Inrush current
  typ. 350 mA DC (Δt < 1 µs at Us)
• Minimum switching voltage
  5 V AC/DC
• Maximum inrush current
  6 A
• Switching capacity
  min. 50 mW
• Nominal operating mode
  100% operating factor
• Housing material
  PBT
• Min. degree of protection of inst. location
  IP54
• Conductor cross section flexible
  0.2 mm² ... 2.5 mm²
Conductor cross-section AWG
24 ... 12
Designation
Air clearances and creepage distances between the power circuits
Vibration (operation)
10 Hz ... 150 Hz, 2g (In the event of stress caused by vibration, contact reactions are possible for up to 1 ms.)
ECLASS 10.0.1
27371601
ECLASS 7.0
27371601
ETIM 6.0
EC001437
UNSPSC 13.2
39121501
Width
22.5 mm
Ambient temperature (operation)
-20 °C ... 55 °C
Max. permissible relative humidity (operation)
75 % (on average, 85% infrequently, non-condensing)
Power consumption at US
typ. 1.2 W
Protective circuit
Surge protection Varistor
Maximum switching voltage
230 V AC/DC (Observe the load curve)
Sq. Total current
72 A2
Output fuse
10 A gL/gG (N/O contact)
Mounting type
DIN rail mounting
Connection method
Screw connection
Torque
0.6 Nm
Safety Integrity Level (SIL)
1
Standards/regulations
DIN EN 50178
Rated insulation voltage
250 V
ECLASS 4.0
27371100
ECLASS 5.1
27371600
UNSPSC 11
39121501
UNSPSC 19.0
39122334
Height
114.5 mm
Max. permissible humidity (storage/transport)
75 % (on average, 85% infrequently, non-condensing)
Rated control circuit supply voltage US
24 V AC/DC -15 % / +10 %
Typical release time
typ. 20 ms (when controlled via A1)
Recovery time
< 500 ms
Contact type
5 enabling current paths
Interrupting rating (ohmic load) max.
144 W (N/O contact, 24 V DC, τ = 0 ms)
Switching capacity according to IEC 60947-5-1
3 A (24 V (DC13))
Mounting position
vertical or horizontal
pluggable
Yes
Stop category
0
Category
1
Rated surge voltage/insulation
4 kV / basic isolation (safe isolation, reinforced isolation and 6 kV between A1/A2, 53/54, 71/72 and 13/14, 23/24, 33/34, 43/44.)
Conformance
CE-compliant
ECLASS 4.1
27371100
ECLASS 5.0
27371600
ETIM 3.0
EC001449
ETIM 4.0
EC001449
UNSPSC 12.01
39121501
UNSPSC 21.0
39122334
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Depth
99 mm
Maximum altitude
max. 2000 m (Above sea level)
Input voltage range
20.4 V AC/DC ... 26.4 V AC/DC
Operating voltage display
1 x green LED
Contact material
AgSnO2
Inrush current, minimum
10 mA
Mechanical service life
10x 106 cycles
Relay type
Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Housing color
yellow
Screw thread
M3
Performance level (PL)
c
Overvoltage category
III
Shock
15g (In the event of stress caused by shock, contact reactions are possible for up to 2 ms.)
ECLASS 6.0
27371600
ETIM 2.0
EC001449
ETIM 7.0
EC001437
UNSPSC 18.0
39122334
Degree of pollution
2
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 11.0
27371819
ECLASS 9.0
27371601
UNSPSC 6.01
30211901
UNSPSC 7.0901
39121501
UNSPSC 20.0
39122334

Product condition