2981813 Phoenix Contact Electrical Safety Devices

2981813 Product Details

• Width
  22.5 mm
• Max. permissible humidity (storage/transport)
  75 % (on average, 85% infrequently, non-condensing)
• Max. permissible relative humidity (operation)
  75 % (on average, 85% infrequently, non-condensing)
• Input voltage range in reference to UN
  0.85 ... 1.1
• Recovery time
  330 ms (Restart)
• Max. permissible overall conductor resistance
  50 Ω (Input and reset circuit at UN)
• Maximum switching voltage
  250 V AC/DC
• Limiting continuous current
  6 A (N/O contact)
• Mechanical service life
  approx. 107 cycles
• Switching capacity (360/h cycles)
  on request
• Mounting type
  DIN rail mounting
• Degree of protection
  IP20
• Housing material
  PBT
• Conductor cross section flexible
  0.2 mm² ... 1.5 mm²
• Stop category
  0
• Safety Integrity Level (SIL)
  3
• Degree of pollution
  2
• ECLASS 10.0.1
  27371819
• ECLASS 5.1
  27371900
• ECLASS 6.0
  27371800
ETIM 7.0
EC001449
UNSPSC 20.0
39122205
ETIM 2.0
EC001449
UNSPSC 7.0901
39121501
UNSPSC 21.0
39122205
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Height
112 mm
Nominal input voltage UN
24 V DC
Typical response time
150 ms (Monitored/manual and auto-start)
Protective circuit
Suppressor diode, 33 V DC
Minimum switching voltage
15 V AC/DC
Sq. Total current
120 A2 (see to derating)
Switching capacity min.
0.4 W
Nominal operating mode
100% operating factor
pluggable
Yes
Conductor cross-section flexible with ferrule without plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Designation
Air clearances and creepage distances between the power circuits
Category
4
Safety Integrity Level Claim Limit (SIL CL)
3
Overvoltage category
II
Vibration (operation)
10 Hz ... 150 Hz, 2g
ECLASS 4.1
40020600
ECLASS 9.0
27371819
ETIM 6.0
EC001449
UNSPSC 18.0
39122205
Ambient temperature (operation)
-20 °C ... 45 °C
Maximum altitude
≤ 2000 m (Above sea level)
Voltage at input/start and feedback circuit
approx. 24 V DC
Operating voltage display
Green LED
Contact type
4 enabling current paths
Contact material
AgSnO2
Interrupting rating (ohmic load) max.
144 W (24 V DC, τ = 0 ms)
Output fuse
10 A gL/gG NEOZED (N/O contact)
Net weight
166.88 g
Min. degree of protection of inst. location
IP54
Conductor cross section solid
0.2 mm² ... 1.5 mm²
Conductor cross-section AWG
24 ... 16
Stripping length
8 mm
Standards/regulations
DIN EN 60947-1
Rated surge voltage/insulation
4 kV / basic insulation
REACh SVHC
Lead 7439-92-1
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 7.0
27371819
ETIM 3.0
EC001449
UNSPSC 11
39121501
UNSPSC 6.01
30211901
UNSPSC 13.2
39121501
Depth
114.5 mm
Ambient temperature (storage/transport)
-40 °C ... 70 °C
Typical input current at UN
75 mA DC
Typical release time range
0.1 s ... 30 s
Typical release time
20 ms (Undelayed contacts)
Status display
LED K1/K2 and K3(t)/K4(t), green
Maximum inrush current
6 A
Inrush current, minimum
25 mA
Maximum interrupting rating (inductive load)
42 W (24 V DC, τ = 40 ms)
Relay type
Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Mounting position
any
Connection method
Push-in connection
Conductor cross-section flexible with ferrule and plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Performance level (PL)
e
Rated insulation voltage
250 V
Shock
15g
ECLASS 11.0
27371819
ECLASS 4.0
40020600
ECLASS 5.0
27371900
ETIM 4.0
EC001449
UNSPSC 12.01
39121501
UNSPSC 19.0
39122205

Product condition