2981745 Phoenix Contact Electrical Safety Devices
Part#:2981745
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Checking verified in-stock parts...
About the product: 1-channel contact extension with TBUS interface, 4 N/O contacts, 1 N/C contact, 1 confirmation current path, the contacts have an off-delay (0.3 ... 3 s), Cat. 3, PL e in accordance with EN ISO 13849, width: 22.5 mm, pluggable Push-in terminal block
About the manufacturer: Phoenix Contact develops and manufactures industrial electrical and electronic technology products that power, protect, connect and automate systems and equipment.
Check out the 2981745 Phoenix Contact price in the box on the right side or send a quick quote.
2981745 Product Details
- Width 22.5 mm
- Ambient temperature (storage/transport) -40 °C ... 70 °C
- Maximum altitude max. 2000 m (Above sea level)
- Typical release time range 0.3 s ... 3 s +50 % (adjustable)
- Operating voltage display Green LED
- Contact material AgSnO2
- Maximum switching voltage 250 V AC/DC
- Maximum interrupting rating (inductive load) 48 W (24 V DC, τ = 40 ms)
- Height 112 mm
- Max. permissible relative humidity (operation) 75 % (on average, 85% infrequently, non-condensing)
- Typical input current at UN 84 mA
- Status display Green LED
- Minimum switching voltage 15 V AC/DC
- Maximum inrush current 6 A (N/O contact)
- Output fuse 10 A gL/gG NEOZED (N/O contact)
- Degree of protection IP20
- Mounting type DIN rail mounting
- Conductor cross section solid 0.2 mm² ... 1.5 mm²
- Conductor cross-section AWG 24 ... 16
- Standards/regulations DIN EN 50178/VDE 0160
- REACh SVHC Lead 7439-92-1
- ECLASS 4.0 40020600
- ECLASS 6.0 27371800
- ETIM 2.0 EC001449
- UNSPSC 11 39121501
- UNSPSC 20.0 39122205
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Input voltage range in reference to UN 0.85 ... 1.1
- Recovery time 1 s
- Limiting continuous current 6 A (N/O contact)
- Interrupting rating (ohmic load) max. 144 W (24 V DC, τ = 0 ms, N/C contact 65/66: 72 W)
- Nominal operating mode 100% operating factor
- Min. degree of protection of inst. location IP54
- Conductor cross-section flexible with ferrule without plastic sleeve 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
- Stop category 1
- Designation Air clearances and creepage distances between the power circuits
- Overvoltage category III
- ECLASS 10.0.1 27371819
- ECLASS 5.0 27371900
- ECLASS 7.0 27371819
- ETIM 3.0 EC001449
- UNSPSC 6.01 30211901
- UNSPSC 7.0901 39121501
- UNSPSC 19.0 39122205
- Depth 114.5 mm
- Max. permissible humidity (storage/transport) 75 % (on average, 85% infrequently, non-condensing)
- Nominal input voltage UN 24 V DC
- Protective circuit Fuse PTC resistor
- Inrush current, minimum 25 mA
- Switching capacity min. 0.4 W
- Mounting position any
- Connection method Push-in connection
- Conductor cross section flexible 0.2 mm² ... 1.5 mm²
- Safety Integrity Level (SIL) 3 (In conjunction with suitable evaluating device)
- Rated insulation voltage 250 V
- Ambient temperature (operation) -20 °C ... 55 °C
- Typical response time 20 ms
- Contact type 4 delayed enabling current paths
- Sq. Total current 50 A2 (ITH2 = I12 + I22 + I32 + I42)
- Switching capacity (360/h cycles) 6 A (24 V DC)
- Mechanical service life approx. 107 cycles
- Net weight 197.1 g
- Stripping length 8 mm
- Performance level (PL) e (In conjunction with suitable evaluating device)
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 11.0 27371819
- ECLASS 5.1 27371900
- ETIM 6.0 EC001449
- ETIM 7.0 EC001449
- UNSPSC 12.01 39121501
- UNSPSC 18.0 39122205
- Relay type Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
- Housing color yellow
- pluggable Yes
- Conductor cross-section flexible with ferrule and plastic sleeve 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
- Safety Integrity Level Claim Limit (SIL CL) 3 (In conjunction with suitable evaluating device)
- Category 3 (In conjunction with suitable evaluating device)
- Rated surge voltage/insulation 4 kV / basic isolation (safe isolation, reinforced insulation and 6 kV between input circuit/N/C contacts and enabling current paths).
- Degree of pollution 2
- ECLASS 4.1 40020600
- ECLASS 9.0 27371819
- ETIM 4.0 EC001449
- UNSPSC 13.2 39121501
- UNSPSC 21.0 39122205
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
Shipping and Delivery Worldwide
calculate cost and time at Checkout
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨