2981732 Phoenix Contact Electrical Safety Devices

2981732 Product Details

• Ambient temperature (operation)
  -20 °C ... 55 °C
• Net weight
  234.85 g
• Min. degree of protection of inst. location
  IP54
• Connection method
  Screw connection
• Conductor cross-section AWG
  24 ... 12
• Screw thread
  M3
• Safety Integrity Level Claim Limit (SIL CL)
  3 (In conjunction with suitable evaluating device)
• Degree of pollution
  2
• ECLASS 11.0
  27371819
• ECLASS 5.0
  27371900
• ETIM 2.0
  EC001449
• ETIM 7.0
  EC001449
• UNSPSC 11
  39121501
• UNSPSC 12.01
  39121501
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Height
  99 mm
• Max. permissible relative humidity (operation)
  75 % (on average, 85% infrequently, non-condensing)
• Nominal input voltage UN
  24 V DC
• Operating voltage display
  Green LED
• Recovery time
  1 s
Maximum inrush current
6 A (N/O contact)
Inrush current, minimum
25 mA
Maximum interrupting rating (inductive load)
48 W (24 V DC, τ = 40 ms)
Relay type
Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Mounting type
DIN rail mounting
Stop category
1
Rated insulation voltage
250 V
ECLASS 10.0.1
27371819
ECLASS 4.1
40020600
ETIM 4.0
EC001449
UNSPSC 19.0
39122205
Ambient temperature (storage/transport)
-40 °C ... 70 °C
Maximum altitude
max. 2000 m (Above sea level)
Typical response time
20 ms
Typical release time range
0.3 s ... 3 s +50 % (adjustable)
Contact type
4 delayed enabling current paths
Maximum switching voltage
250 V AC/DC
Interrupting rating (ohmic load) max.
144 W (24 V DC, τ = 0 ms, N/C contact 65/66: 72 W)
Mechanical service life
approx. 107 cycles
Degree of protection
IP20
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Safety Integrity Level (SIL)
3 (In conjunction with suitable evaluating device)
Standards/regulations
DIN EN 50178/VDE 0160
REACh SVHC
Lead 7439-92-1
ECLASS 7.0
27371819
ETIM 6.0
EC001449
UNSPSC 20.0
39122205
Width
22.5 mm
Depth
114.5 mm
Max. permissible humidity (storage/transport)
75 % (on average, 85% infrequently, non-condensing)
Typical input current at UN
84 mA
Protective circuit
Fuse PTC resistor
Minimum switching voltage
15 V AC/DC
Limiting continuous current
6 A (N/O contact)
Switching capacity min.
0.4 W
Output fuse
10 A gL/gG NEOZED (N/O contact)
Mounting position
any
Housing color
yellow
Conductor cross section solid
0.2 mm² ... 2.5 mm²
Designation
Air clearances and creepage distances between the power circuits
Category
3 (In conjunction with suitable evaluating device)
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.0
40020600
ECLASS 9.0
27371819
ETIM 3.0
EC001449
UNSPSC 7.0901
39121501
UNSPSC 21.0
39122205
Input voltage range in reference to UN
0.85 ... 1.1
Status display
Green LED
Contact material
AgSnO2
Sq. Total current
50 A2 (ITH2 = I12 + I22 + I32 + I42)
Switching capacity (360/h cycles)
6 A (24 V DC)
Nominal operating mode
100% operating factor
pluggable
Yes
Stripping length
7 mm
Performance level (PL)
e (In conjunction with suitable evaluating device)
Rated surge voltage/insulation
4 kV / basic isolation (safe isolation, reinforced insulation and 6 kV between input circuit/N/C contacts and enabling current paths).
Overvoltage category
III
ECLASS 6.0
27371800
ECLASS 5.1
27371900
UNSPSC 6.01
30211901
UNSPSC 13.2
39121501
UNSPSC 18.0
39122205

Product condition