2981525 Phoenix Contact Electrical Safety Devices

2981525 Product Details

• Width
  22.5 mm
• Max. permissible humidity (storage/transport)
  75 % (on average, 85% infrequently, non-condensing)
• Typical response time
  20 ms
• Operating voltage display
  Green LED
• Limiting continuous current
  6 A (N/O contact)
• Mechanical service life
  approx. 107 cycles
• Output fuse
  10 A gL/gG NEOZED (N/O contact)
• Housing color
  yellow
• Conductor cross section solid
  0.2 mm² ... 1.5 mm²
• Height
  112 mm
• Max. permissible relative humidity (operation)
  75 % (on average, 85% infrequently, non-condensing)
• Maximum altitude
  max. 2000 m (Above sea level)
• Contact type
  4 delayed enabling current paths
• Maximum inrush current
  6 A (N/O contact)
• Inrush current, minimum
  25 mA
• Switching capacity (360/h cycles)
  6 A (24 V DC)
• Net weight
  228.7 g
• Min. degree of protection of inst. location
  IP54
• Conductor cross section flexible
  0.2 mm² ... 1.5 mm²
• Performance level (PL)
  e (In conjunction with suitable evaluating device)
REACh SVHC
Lead 7439-92-1
ECLASS 7.0
27371819
ETIM 2.0
EC001449
ETIM 7.0
EC001449
UNSPSC 12.01
39121501
UNSPSC 18.0
39122205
Depth
114.5 mm
Input voltage range in reference to UN
0.85 ... 1.1
Typical release time range
0.5 s ... 38 s ±20 % (BG rating to max. 30 s)
Protective circuit
Surge protection Suppressor diode
Minimum switching voltage
15 V AC/DC
Interrupting rating (ohmic load) max.
114 W (24 V DC, τ = 0 ms, N/C contact 65/66: 72 W)
Relay type
Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Degree of protection
IP20
Conductor cross-section AWG
24 ... 16
Stop category
1
Safety Integrity Level Claim Limit (SIL CL)
3 (In conjunction with suitable evaluating device)
Rated insulation voltage
250 V
ECLASS 4.1
40020600
ECLASS 5.1
27371900
ETIM 4.0
EC001449
UNSPSC 20.0
39122205
Ambient temperature (storage/transport)
-40 °C ... 70 °C
Typical input current at UN
84 mA
Recovery time
1 s
Contact material
AgSnO2
Sq. Total current
50 A2 (ITH2 = I12 + I22 + I32 + I42)
Maximum interrupting rating (inductive load)
48 W (24 V DC, τ = 40 ms)
Mounting type
DIN rail mounting
Connection method
Push-in connection
Conductor cross-section flexible with ferrule without plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Designation
Air clearances and creepage distances between the power circuits
Standards/regulations
DIN EN 50178/VDE 0160
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.0
40020600
ECLASS 5.0
27371900
ETIM 6.0
EC001449
UNSPSC 11
39121501
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Ambient temperature (operation)
-20 °C ... 55 °C
Nominal input voltage UN
24 V DC
Status display
Green LED
Maximum switching voltage
250 V AC/DC
Switching capacity min.
0.4 W
Nominal operating mode
100% operating factor
Mounting position
any
pluggable
Yes
Safety Integrity Level (SIL)
3 (In conjunction with suitable evaluating device)
Category
3 (In conjunction with suitable evaluating device)
Degree of pollution
2
ECLASS 10.0.1
27371819
ECLASS 6.0
27371800
ECLASS 9.0
27371819
UNSPSC 6.01
30211901
UNSPSC 13.2
39121501
Conductor cross-section flexible with ferrule and plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Stripping length
8 mm
Rated surge voltage/insulation
4 kV / basic isolation (safe isolation, reinforced insulation and 6 kV between input circuit/N/C contacts and enabling current paths).
Overvoltage category
III
ECLASS 11.0
27371819
ETIM 3.0
EC001449
UNSPSC 7.0901
39121501
UNSPSC 19.0
39122205
UNSPSC 21.0
39122205

Product condition