2981509 Phoenix Contact Electrical Safety Devices
Part#:2981509
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 1
Apr 24, 2024
About the product: Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, automatic or manual activation, 3 N/O contacts, 1 N/C contact, 2 N/O contacts with a fixed dropout delay of 10.0 s, pluggable Push-in t
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Safety Devices that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2981509 Phoenix Contact price in the box on the right side or send a quick quote.
2981509 Product Details
- Width 45 mm
- Max. permissible relative humidity (operation) 75 % (on average, 85% infrequently, non-condensing)
- Depth 114.5 mm
- Maximum altitude ≤ 2000 m (Above sea level)
- Rated control supply current IS typ. 150 mA
- Typical response time < 600 ms (automatic start)
- Status display 4 x green LEDs
- Delay time K3(t), K4(t) fixed depending on model
- Maximum switching voltage 250 V AC/DC (Observe the load curve)
- Output fuse 10 A gL/gG (N/O contact)
- Nominal operating mode 100% operating factor
- Degree of protection IP20
- Connection method Push-in connection
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Ambient temperature (storage/transport) -40 °C ... 70 °C
- Input voltage range 20.4 V DC ... 26.4 V DC
- Typical release time < 20 ms (when controlled via S11/S12 and S21/S22)
- Filter time 1 ms (at A1 in the event of voltage dips at Us)
- Minimum switching voltage 5 V AC/DC
- Inrush current, minimum 10 mA
- Net weight 445 g
- Housing material PBT
- Conductor cross-section flexible with ferrule and plastic sleeve 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
- Standards/regulations DIN EN 50178/VDE 0160
- Rated surge voltage/insulation Basic insulation 4 kV:between all current paths and housingSafe isolation, reinforced insulation 6 kV:between 13/14, 23/24, 33/34, and the remaining current pathsbetween 13/14, 23/24, 33/34 among one another
- Vibration (operation) 10 Hz ... 150 Hz, 2g
- ECLASS 4.1 40020600
- ETIM 6.0 EC001449
- UNSPSC 19.0 39122205
- Height 112 mm
- Max. permissible humidity (storage/transport) 75 % (on average, 85% infrequently, non-condensing)
- Power consumption at US typ. 3.6 W
- Voltage at input/start and feedback circuit 24 V DC -15 % / +10 %
- Recovery time < 1 s
- Operating voltage display 1 x green LED
- Max. permissible overall conductor resistance approx. 11 Ω (Input and start circuits at US)
- Maximum inrush current 20 A (Δt 100 ms, undelayed contacts)
- Interrupting rating (ohmic load) max. 144 W (24 V DC, τ = 0 ms)
- Switching capacity min. 50 mW
- Relay type Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
- Housing color yellow
- Conductor cross section solid 0.2 mm² ... 1.5 mm²
- Conductor cross-section AWG 24 ... 16
- Stop category 0
- Category 4 (Undelayed contacts)
- Overvoltage category III
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 5.1 27371900
- ECLASS 9.0 27371819
- ETIM 4.0 EC001449
- UNSPSC 20.0 39122205
- Ambient temperature (operation) -20 °C ... 55 °C (observe derating)
- Rated control circuit supply voltage US 24 V DC -15 % / +10 %
- Inrush current 200 mA (at US)
- Typ. starting time with Us < 600 ms (when controlled via A1)
- Maximum switching frequency 0.5 Hz
- Limiting continuous current 6 A (N/O contact, pay attention to the derating)
- Sq. Total current 55 A2 (observe derating)
- Mechanical service life 10x 106 cycles
- Mounting position any
- Mounting type DIN rail mounting
- Conductor cross section flexible 0.2 mm² ... 1.5 mm²
- Stripping length 8 mm
- Safety Integrity Level Claim Limit (SIL CL) 3 (for delayed contacts SILCL 2)
- Degree of pollution 2
- Shock 15g
- ECLASS 11.0 27371819
- ECLASS 6.0 27371800
- ETIM 3.0 EC001449
- ETIM 7.0 EC001449
- UNSPSC 13.2 39121501
- UNSPSC 21.0 39122205
- Current consumption < 40 mA (with Us/Ix to S10)
- Concurrence ∞
- Protective circuit Surge protection Suppressor diode
- Contact material AgSnO2
- Contact type 5 enabling current paths
- Maximum interrupting rating (inductive load) 42 W (24 V DC, τ = 40 ms, delayed contacts: 48 W)
- Switching capacity (360/h cycles) 4 A (24 V DC)
- Min. degree of protection of inst. location IP54
- pluggable Yes
- Designation Air clearances and creepage distances between the power circuits
- Rated insulation voltage 250 V AC
- Conformance CE-compliant
- REACh SVHC Lead 7439-92-1
- ECLASS 10.0.1 27371819
- ECLASS 4.0 40020600
- ECLASS 7.0 27371819
- UNSPSC 6.01 30211901
- UNSPSC 7.0901 39121501
- UNSPSC 11 39121501
- Conductor cross-section flexible with ferrule without plastic sleeve 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
- Safety Integrity Level (SIL) 3 (for delayed contacts SIL 2)
- Performance level (PL) e (for delayed contacts PL d)
- ECLASS 5.0 27371900
- ETIM 2.0 EC001449
- UNSPSC 12.01 39121501
- UNSPSC 18.0 39122205
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
This item can ship within 3 days!
1-year warranty
$262.16
2981509
Stock:
1
Select Qty:
$262.16
$262.16 each
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨