2981402 Phoenix Contact Electrical Safety Devices

2981402 Product Details

• Ambient temperature (operation)
  -20 °C ... 55 °C
• Max. permissible humidity (storage/transport)
  75 % (on average, 85% infrequently, non-condensing)
• Inrush current
  typ. 600 mA (Δt = 200 µs at Us)
• Safety Integrity Level Claim Limit (SIL CL)
  1
• Switching capacity
  min. 50 mW
• Depth
  99 mm
• Max. permissible relative humidity (operation)
  75 % (on average, 85% infrequently, non-condensing)
• Input voltage range
  19.2 V AC/DC ... 26.4 V AC/DC
• Recovery time
  < 500 ms
• Contact type
  5 enabling current paths
• Maximum switching voltage
  230 V AC/DC (Observe the load curve)
• Sq. Total current
  72 A2
• Inrush current, minimum
  10 mA
• Switching capacity (360/h cycles)
  4 A (24 V (DC13))
• Nominal operating mode
  100% operating factor
• Net weight
  150.18 g
• Connection method
  Screw connection
• Conductor cross section flexible
  0.2 mm² ... 2.5 mm²
• Screw thread
  M3
• Designation
  Air clearances and creepage distances between the power circuits
Stop category
0
Degree of pollution
2
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Maximum altitude
≤ 2000 m (Above sea level)
Typ. starting time with Us
typ. 20 ms (when controlled via A1)
Maximum switching frequency
0.5 Hz
Minimum switching voltage
5 V AC/DC
Maximum inrush current
6 A
Interrupting rating (ohmic load) max.
144 W (N/O contact, 24 V DC, τ = 0 ms)
Output fuse
10 A gL/gG (N/O contact)
Mounting type
DIN rail mounting
Mounting position
vertical or horizontal
Min. degree of protection of inst. location
IP54
Conductor cross-section AWG
24 ... 12
Torque
0.6 Nm
Performance level (PL)
c
Category
1
Conformance
CE-compliant
ECLASS 10.0.1
27371601
ECLASS 5.0
27371600
ECLASS 7.0
27371601
ETIM 4.0
EC001449
UNSPSC 12.01
39121501
Height
114.5 mm
Rated control circuit supply voltage US
120 V AC/DC -20 % ... +10 %
Power consumption at US
typ. 1.32 W
Operating voltage display
1 x green LED
Contact material
AgSnO2
Limiting continuous current
6 A (N/O contact)
Maximum interrupting rating (inductive load)
42 W (N/O contact, 24 V DC, τ = 40 ms)
Mechanical service life
10x 106 cycles
Switching capacity according to IEC 60947-5-1
3 A (24 V (DC13))
Relay type
Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Degree of protection
IP20
Housing color
yellow
Housing material
PBT
Conductor cross section solid
0.2 mm² ... 2.5 mm²
pluggable
Yes
Stripping length
7 mm
Safety Integrity Level (SIL)
1
Standards/regulations
DIN EN 50178
Shock
15g (In the event of stress caused by shock, contact reactions are possible for up to 2 ms.)
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 9.0
27371601
ETIM 3.0
EC001449
UNSPSC 11
39121501
Width
22.5 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Rated control supply current IS
typ. 11 mA
Typical release time
typ. 20 ms (when controlled via A1)
Protective circuit
Surge protection Varistor
Rated insulation voltage
250 V
Rated surge voltage/insulation
4 kV basic insulation (4 kV safe isolation, reinforced insulation between A1/A2, 13/14, 23/24, 33/34 to 43/44, 53/54, 61/62, 71/72)
Overvoltage category
III
ECLASS 4.1
27371100
ETIM 7.0
EC001437
ETIM 6.0
EC001437
UNSPSC 19.0
39122334
UNSPSC 18.0
39122334
Vibration (operation)
10 Hz ... 150 Hz, 2g (In the event of stress caused by vibration, contact reactions are possible for up to 1 ms.)
ECLASS 4.0
27371100
ECLASS 6.0
27371600
UNSPSC 7.0901
39121501
UNSPSC 20.0
39122334
ECLASS 11.0
27371819
ECLASS 5.1
27371600
ETIM 2.0
EC001449
UNSPSC 6.01
30211901
UNSPSC 13.2
39121501
UNSPSC 21.0
39122334

Product condition