2963954 Phoenix Contact Electrical Safety Devices
Part#:2963954
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
Safety relay for emergency stop and safety door up to SIL 1, SIL CL 1, Cat. 1, PL c, depending on the application up to SIL 3, SIL CL 3, Cat. 4, PL e, single-channel operation, 4 enabling current paths, US = 24 V AC/DC, pluggable Push-in terminal block
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Safety Devices that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2963954 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Height 112 mm
- Maximum altitude ≤ 2000 m (Above sea level)
- Rated control supply current IS typ. 140 mA AC
- Recovery time < 1 s
- Status display 2 x green LEDs
- Filter time 2 ms (at A1 in the event of voltage dips at Us)
- Inrush current, minimum 10 mA
- Interrupting rating (ohmic load) max. 144 W (24 V DC, τ = 0 ms)
- Mounting position vertical or horizontal
- Degree of protection IP20
- Housing material PBT
- Stripping length 8 mm
- Safety Integrity Level (SIL) 1 (up to SIL 3 depending on the application)
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Ambient temperature (operation) -20 °C ... 65 °C (observe derating)
- Max. permissible relative humidity (operation) 75 % (on average, 85% infrequently, non-condensing)
- Power consumption at US typ. 3.36 W (AC)
- Voltage at input/start and feedback circuit 24 V DC -15 % / +10 %
- Protective circuit Surge protection Suppressor diode
- Maximum switching voltage 250 V AC/DC (Observe the load curve)
- Maximum inrush current 20 A (Δt 100 ms)
- Output fuse 10 A gL/gG (N/O contact)
- Nominal operating mode 100% operating factor
- Connection method Push-in connection
- pluggable Yes
- Conductor cross section solid 0.2 mm² ... 1.5 mm²
- Depth 114.5 mm
- Width 22.5 mm
- Max. permissible humidity (storage/transport) 75 % (on average, 85% infrequently, non-condensing)
- Inrush current 2 A (Δt = 10 ms at Us)
- Typical response time < 65 ms (automatic start)
- Typical release time < 45 ms (when controlled via S12)
- Minimum switching voltage 5 V AC/DC
- Sq. Total current 72 A2 (observe derating)
- Mechanical service life 10x 106 cycles
- Net weight 194.38 g
- Assembly instructions See derating curve
- Conductor cross-section flexible with ferrule without plastic sleeve 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
- Performance level (PL) c (up to PL e depending on the application)
- Overvoltage category III
- ECLASS 10.0.1 27371819
- ECLASS 5.0 27371900
- ETIM 3.0 EC001449
- UNSPSC 13.2 39121501
- UNSPSC 19.0 39122205
- Ambient temperature (storage/transport) -40 °C ... 70 °C
- Rated control circuit supply voltage US 24 V AC/DC -15 % / +10 %
- Typ. starting time with Us < 65 ms (when controlled via A1)
- Maximum switching frequency 1 Hz
- Contact type 4 enabling current paths
- Contact material AgSnO2
- Maximum interrupting rating (inductive load) 42 W (24 V DC, τ = 40 ms)
- Relay type Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
- Min. degree of protection of inst. location IP54
- Conductor cross section flexible 0.2 mm² ... 1.5 mm²
- Conductor cross-section flexible with ferrule and plastic sleeve 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
- Standards/regulations DIN EN 50178/VDE 0160
- Vibration (operation) 10 Hz ... 150 Hz, 2g
- ECLASS 4.0 40020600
- ECLASS 4.1 40020600
- ETIM 4.0 EC001449
- UNSPSC 7.0901 39121501
- UNSPSC 11 39121501
- Current consumption < 50 mA (with Us/Ix to S12)
- Operating voltage display 1 x green LED
- Max. permissible overall conductor resistance approx. 22 Ω (Input and start circuits at US)
- Limiting continuous current 6 A (N/O contact, pay attention to the derating)
- Switching capacity min. 50 mW
- Switching capacity (360/h cycles) 4 A (24 V DC)
- Mounting type DIN rail mounting
- Housing color yellow
- Conductor cross-section AWG 24 ... 16
- Stop category 0
- Category 1 (up to Cat. 4 depending on the application)
- Rated surge voltage/insulation Basic insulation 4 kV:between all current paths and housingSafe isolation, reinforced insulation 6 kV:between A1/A2 and 13/14, 23/24, 33/34, 43/44between S11/S12/S33/S34 and 13/14, 23/24, 33/34, 43/44between 51/52 and 13/14, 23/24, 33/34, 43/44
- Conformance CE-compliant
- ECLASS 11.0 27371819
- ECLASS 6.0 27371800
- ECLASS 7.0 27371819
- UNSPSC 6.01 30211901
- UNSPSC 20.0 39122205
- Designation Air clearances and creepage distances between the power circuits
- Rated insulation voltage 250 V AC
- Shock 15g
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 9.0 27371819
- ETIM 7.0 EC001449
- UNSPSC 18.0 39122205
- UNSPSC 21.0 39122205
- Safety Integrity Level Claim Limit (SIL CL) 1 (up to SILCL 3 depending on the application)
- Degree of pollution 2
- ECLASS 5.1 27371900
- ETIM 2.0 EC000196
- ETIM 6.0 EC001449
- UNSPSC 12.01 39121501
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
